| 62.20.0644.500.01.1503 Standard 5 Slewing Ring Bearings | with tapered bore:380 min-1; Static (Cor):16.7 mm; Grease:9970 kN; B:243 mm; rs (min):5 mm; Oil:754.780 kN; d:360 mm; Dynamic (Cr):9 mm; Pu:4870 kN; with cylindrical bore:300 min-1; D:600 mm; |
| 232.21.0875.013 Type 21/950.2 Standard 5 Slewing Ring Bearings | d:49.213 mm; Mass bearing unit:1.25 kg; Limiting speed:2200 r/min; Fatigue load limit Pu:0.98 kN; A5:42.4 mm; H:115 mm; L:135 mm; H1:57.2 mm; Thread length G1:23.5 mm; Hexagonal key size for grub screw N:4.763 mm; J:101.6 mm; Thread size attachement end G:M16; A1:37.5 mm; Thread grub screw G2:3/8-24 UNF; B:51.6 mm; Basic static load rating C0:23.2 kN; Recommended tightening torque for grub screw:16.5 N·m; |
| R8-46E3 Rotek Slewing Ring Bearings | Pu:304 kN; with tapered bore:3 600 min-1; Oil:38.410 kN; Static (Cor):5.5 mm; B:46 mm; rs (min):2.1 mm; Grease:315 kN; with cylindrical bore:2 800 min-1; d:60 mm; Dynamic (Cr):3 mm; D:130 mm; |
| R9-63N3 Rotek Slewing Ring Bearings | Cap bolt:2 x 5/8-11 UNC; J max.:295.275 mm; Cap bolt, SAE grade:8; P120°:38.3 kN; H:192.088 mm; Initial grease fill:286.33 g; PG:1/8 NPT; da:60.325 mm; Stabilizing ring:2 x SR-1615; Taconite seal:TER 36; P150°:34.7 kN; Appropriate attachment bolt size G:0.625 in; J1:53.975 mm; P90°:60.9 kN; A1:98.425 mm; P60°:101 kN; R1:60.325 mm; h:42.862 mm; Mass pillow block:21.5 kg; End plug (suffix Y):EPR 7; |
| 3R6-71P9 Rotek Slewing Ring Bearings | ra max.:2 mm; r3,4 min.:1.5 mm; Basic dynamic load rating C:166 kN; Calculation factor Y:1.1; C:30 mm; Calculation factor e:0.54; da max.:56 mm; db min.:55 mm; Reference speed:5000 r/min; T:38.25 mm; d:45 mm; Limiting speed:6700 r/min; D1:106 mm; a:29.905 mm; Dimension series:5FD; r1,2 min.:2 mm; Mass bearing:1.53 kg; D:100 mm; B:36 mm; C1:7 mm; |
| 161.25.0764.890.11.1503 Standard 5 Slewing Ring Bearings | A1:15.3 mm; Hexagonal key size for grub screw N:3.175 mm; Thread grub screw G2:1/4-28 UNF; A5:30.5 mm; Db:78 mm; J:82.5 mm; Limiting speed:3800 r/min; L:108 mm; Fatigue load limit Pu:0.475 kN; T:42.2 mm; d:31.75 mm; Basic static load rating C0:11.2 kN; Basic dynamic load rating C:16.3 kN; A:33 mm; Recommended diameter for attachment bolts, mm G:10 mm; B:38.1 mm; s1:22.2 mm; Recommended tightening torque for grub screw:4 N·m; |
| A19-150P1 Rotek Slewing Ring Bearings | L:225.425 mm; S:0.794 mm; s:28.575 mm; H1:63.5 mm; H2:41.275 mm; d2:82.55 mm; Mass bearing unit:5.44 kg; J max.:187.325 mm; Limiting speed:1300 r/min; Basic dynamic load rating C:99.6 kN; A1:81.756 mm; Attachment bolt diameter G:15.875 mm; J min.:163.512 mm; B:79.375 mm; A:60.325 mm; H:129.778 mm; da:55.563 mm; |
| A16-79P1A Rotek Slewing Ring Bearings | N1:34.925 mm; R1:120.65 mm; ba:78.581 mm; Initial grease fill:1672.65 g; J1:114.3 mm; S:4.763 mm; P120°:107 kN; H2:79.375 mm; Appropriate attachment bolt size G:1.25 in; Mass pillow block:170 kg; Cap bolt:4 x 7/8-9 UNC; Eye bolt:2 x 1/2-13 UNC; R2:42.069 mm; Cap bolt, SAE grade:5; Cap bolt recommended tightening torque:271.2 N·m; RG:1 NPT; End plug (suffix Y):EPR 21; H:401.637 mm; Da:339.999 mm; |
| 3R10-98P9 Rotek Slewing Ring Bearings | Cap bolt, SAE grade:8; Stabilizing ring:SR-0-22; PosiTrac Plus contact element:2 x B10724-109; S:4.763 mm; Da:240 mm; Appropriate attachment bolt size G:0.875 in; H:287.337 mm; Cap bolt:2 x 1-8 UNC; h:61.119 mm; da:101.6 mm; Max. speed for PosiTrac Plus seal:1450 r/min; Initial grease fill:382.73 g; P120°:73.8 kN; J min.:371.475 mm; Housing:SAF 622; R2:36.513 mm; A1:133.35 mm; P90°:113 kN; |
| 230.20.0600.503 Type 21/750. Standard 5 Slewing Ring Bearings | a:25.081 mm; Mass bearing:1.24 kg; Dimension series:3EB; Limiting speed:5300 r/min; Fatigue load limit Pu:18 kN; Calculation factor Y:1.4; C:21 mm; D:125 mm; Cb min.:5 mm; da max.:82 mm; d:70 mm; Ca min.:4 mm; Reference speed:4300 r/min; T:26.25 mm; Da max.:116.5 mm; Basic static load rating C0:156 kN; B:24 mm; Calculation factor e:0.43; Db min.:118 mm; d1 ≈:94.06 mm; |
| S22-140E1 Rotek Slewing Ring Bearings | Mass rod end:3.2 kg; d2 max.:104 mm; B:32 mm; Basic static load rating C0:224 kN; Material constant KM:330; Specific dynamic load factor K:100 N/mm²; dk:60 mm; h1:145 mm; l4 max.:199 mm; l3 min.:65 mm; l5 ≈:30 mm; l7 min.:55 mm; G:M 42x3; d4 ≈:65 mm; w:55 mm; C1 max.:28 mm; α:7 °; d:45 mm; r1 min.:0.6 mm; Basic dynamic load rating C:127 kN; |
| 231.20.0600.503 Type 21/750.1 Standard 5 Slewing Ring Bearings | P150°:48 kN; P180°:57.4 kN; Initial grease fill:181.44 g; PG:1/4 NPT; Eye bolt:2 x 3/8-16 UNC; ba:46.831 mm; h:40.481 mm; Adapter sleeve assembly:SNW 3024x4; A2:155.575 mm; H1:114.3 mm; Labyrinth ring:2 x LOR 657; P120°:52.5 kN; Mass pillow block:39.5 kg; P90°:84.5 kN; RG:3/8 NPT; H2:44.45 mm; Pa:16.7 kN; Da:180 mm; H:222.25 mm; Ca:55.804 mm; |
| W13-49P1 Rotek Slewing Ring Bearings | C1 max.:39 mm; dk:80 mm; r1 min.:1 mm; l1 min.:120 mm; d:60 mm; l7 min.:73 mm; d2 max.:137 mm; Material constant KM:330; Basic static load rating C0:360 kN; Basic dynamic load rating C:245 kN; l2 max.:296 mm; B:44 mm; h:225 mm; Mass rod end:6.25 kg; G:M 60x4; Specific dynamic load factor K:100 N/mm²; α:6 °; |
| 161.16.0400.890.11.1503 Standard 5 Slewing Ring Bearings | b:13.9 mm; Reference speed:1500 r/min; Calculation factor Y0:2.8; ra max.:2.5 mm; Basic dynamic load rating C:1340 kN; B2 ≈:123 mm; d1:220 mm; Calculation factor Y2:4.4; K:7.5 mm; d2 ≈:271 mm; G:Tr 260x4; G1:21 mm; Fatigue load limit Pu:176 kN; D:360 mm; B:92 mm; Mass bearing + sleeve:40.5 kg; Calculation factor Y1:2.9; Da max.:347 mm; Calculation factor e:0.23; r1,2 min.:3 mm; |
| A14-89P1 Rotek Slewing Ring Bearings | Fatigue load limit Pu:0.78 kN; Basic dynamic load rating C:23.8 kN; Preload class A GA:130 N; r3,4 min.:0.6 mm; Ball diameter Dw:9.525 mm; a:22.2 mm; Static axial stiffness, preload class B:98 N/µm; D1:95.32 mm; ra max.:1 mm; db min.:76 mm; Preload class C GC:760 N; Number of balls z:25; Da max.:104 mm; Basic static load rating C0:18.3 kN; Attainable speed for grease lubrication:20500 r/min; |
| A16-53E1A Rotek Slewing Ring Bearings | P120°:52.5 kN; ba:44.45 mm; Housing:SAFS 520; Cap bolt recommended tightening torque:298.3 N·m; H1:114.3 mm; Mass pillow block:40.4 kg; End plug (suffix Y):EPR 12; P150°:48 kN; P180°:57.4 kN; R2:30.163 mm; Cap bolt:5/8-11 UNC; J min.:295.275 mm; Pa:13.8 kN; S:4.763 mm; Appropriate attachment bolt size G:0.875 in; Labyrinth ring:2 x LOR 100; RG:3/8 NPT; h:42.069 mm; Initial grease fill:181.44 g; |
| No. | Brand | S | T | N | w | K | f | h | E |
| 61.20.0644.500.01.1503 | Standard 5 | - | - | - | - | - | - | 210 mm | - |
| 232.20.0800.503 Type 21/950.2 | Standard 5 | - | - | - | - | - | - | - | - |
| 62.20.0710.000.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 60.22.0505.000.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| A9-54N2 | Rotek | 4.763 mm | - | - | - | - | - | 61.913 mm | - |
| A22-105E2A | Rotek | - | - | - | - | - | - | - | - |
| R8-49E3 | Rotek | - | - | - | - | - | - | 110 mm | - |
| 3R6-71E9 | Rotek | - | - | - | - | - | - | - | - |
| 3R6-63P9 | Rotek | - | - | - | - | - | - | - | - |
| R11-71N3 | Rotek | - | - | - | - | - | - | - | - |
| 62.20.0710.001.21.1503 | Standard 5 | - | 23.02 mm | - | - | - | - | - | - |
| 3R16-245N1 | Rotek | - | 38.8 mm | 12.3 mm | - | - | - | - | - |
| 60.25.0555.000.11.1504 | Standard 5 | - | 42.862 mm | - | - | - | - | - | - |
| 232.20.0500.013 Type 21/650.2 | Standard 5 | - | - | - | - | - | - | 79.375 mm | - |
| 230.20.0800.013 Type 21/950. | Standard 5 | - | - | - | - | - | - | 23 mm | - |
| A16-53E1A | Rotek | 4.763 mm | - | - | - | - | - | 42.069 mm | - |
| 62.20.0400.000.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| R8-49N3 | Rotek | - | - | - | - | - | - | - | - |
| 3R10-98P9 | Rotek | 4.763 mm | - | - | - | - | - | 61.119 mm | - |
| W16-84P1 | Rotek | - | 35.25 mm | - | - | - | - | - | - |
| W17-108P1 | Rotek | - | - | - | - | - | - | - | - |
| L9-57P9Z | Rotek | - | - | - | - | - | - | - | - |
| 230.21.0675.013 Type 21/750. | Standard 5 | - | 54.2 mm | - | - | - | - | - | - |
| A18-60P1B | Rotek | - | - | - | - | - | - | - | - |
| 3R16-220N1 | Rotek | - | - | - | - | - | - | - | - |
| A16-152E2 | Rotek | - | - | - | - | - | - | - | - |
| L9-57E9Z | Rotek | - | - | - | - | - | - | - | - |
60.20.0644.575.01.1403 Standard 5 Slewing Ring Bearings Video
060.20.0644.575.01.1403 Rothe erde slewing bearing
060.20.0644.575.01.1403 Rothe erde slewing bearing ; Dimension T: 14.0 in ; Cor - Static Load Rating: 79358 lbf ; Support Type: Round Flange ; Bolt Size: 4 x M16.