| No. | Brand | h | a | H | J | L | G | K | s |
| BCR-2-3/4-BC | SMITH | 55.563 mm | - | - | - | - | - | - | - |
| CS 64 LWX | RBC BEARINGS | - | - | - | - | - | - | - | - |
| CS 72 L | RBC BEARINGS | - | - | - | - | - | - | - | - |
| CRH16VUU | IKO | - | - | - | - | - | - | - | - |
| BCR-3-XC | SMITH | - | - | - | - | - | - | - | - |
| H 104 L | RBC BEARINGS | - | - | - | - | - | - | - | - |
| CS 16 LWX | RBC BEARINGS | - | - | - | - | - | - | - | - |
| DCR-1 | SMITH | - | - | - | - | - | - | 4.5 mm | - |
| H 104 LW | RBC BEARINGS | - | - | - | - | - | - | - | - |
| CS 72 LW | RBC BEARINGS | - | - | - | - | - | - | - | - |
| H 128 LW | RBC BEARINGS | - | - | - | - | - | - | - | - |
| CR24VB | IKO | - | - | - | - | - | - | - | - |
| BCR-1/2-XBC | SMITH | - | - | - | - | - | - | - | - |
| BCR-3/4-XBC | SMITH | - | - | - | - | - | - | - | - |
| CRH22VBUU | IKO | - | - | - | - | - | - | - | - |
| CS 112 L | RBC BEARINGS | - | - | - | - | - | M 180x3 | - | - |
| CR26VBUUR | IKO | - | - | - | - | - | - | - | - |
| CRBC 7 | RBC BEARINGS | - | - | - | - | - | - | - | - |
| CRH16VBUUR | IKO | - | - | - | - | - | - | - | - |
| CS 128 LW | RBC BEARINGS | - | - | - | - | - | - | - | - |
| RBC BEARINGS CS 104 LW Cam Follower and Track Roller - Stud Type | Fillet Radius ra:1.50 mm; Accessories:Seal & Snap-Ring; d:30.000 mm; Basic Dynamic Radial Load Rating C:43600 N; Basic Static Radial Load Rating Co:23600 N; Sealed Speed Rating n3:5600 rpm; Grease Speed Rating Open/Shielded n1:8500 rpm; D:90.0000 mm; B:23.00 mm; Oil Speed Rating Open/Shielded n2:10000 rpm; |
| IKO CR24VBR Cam Follower and Track Roller - Stud Type | A1:120.65 mm; P150°:66.7 kN; Pa:14 kN; J1:69.85 mm; P90°:111 kN; Cap bolt recommended tightening torque:1220 N·m; A2:187.325 mm; Cap bolt:2 x 1-8 UNC; P60°:185 kN; Bearing limiting speed:4000 r/min; |
| RBC BEARINGS CS 80 LW Cam Follower and Track Roller - Stud Type | Static (Cor):22.3 mm; Oil:506.370 kN; rs (min):5 mm; Dynamic (Cr):12 mm; Grease:6520 kN; D:580 mm; with tapered bore:530 min-1; d:320 mm; B:208 mm; with cylindrical bore:450 min-1; |
| SMITH BCR-5/8-XC Cam Follower and Track Roller - Stud Type | Grease Speed Rating Open/Shielded n1:2100 rpm; D:265.0000 mm; d:100.000 mm; Oil Speed Rating Open/Shielded n2:2600 rpm; B:60.00 mm; Basic Static Radial Load Rating Co:300000 N; Basic Dynamic Radial Load Rating C:251000 N; Fillet Radius ra:3.00 mm; Accessories:Without Accessories; |
| SMITH BCR-2-XC Cam Follower and Track Roller - Stud Type | Calculation factor e:0.4; C:18.824 mm; Da min.:98 mm; Db min.:105 mm; T:22 mm; ra max.:3.5 mm; r3,4 min.:1.3 mm; a:20.871 mm; d:63.5 mm; Cb min.:3 mm; |
| IKO CRH18VBUUR Cam Follower and Track Roller - Stud Type | Da max.:469 mm; Fw:415 mm; ra max.:2 mm; Limiting speed:1000 r/min; Fatigue load limit Pu:270 kN; Basic dynamic load rating C:968 kN; C:100 mm; Basic static load rating C0:3000 kN; r1,2 min.:2.1 mm; Reference speed:900 r/min; |
| IKO CR24UUR Cam Follower and Track Roller - Stud Type | Limiting speed:2500 r/min; Basic static load rating C0:2700 kN; da min.:253 mm; Calculation factor Y2:3.4; Calculation factor Y1:2.3; D1 ≈:316 mm; K:7.5 mm; Mass bearing:41.5 kg; d2 ≈:265 mm; Da max.:347 mm; |
| SMITH BCR-2-1/2-XC Cam Follower and Track Roller - Stud Type | Basic Dynamic Radial Load Rating C:11700 N; Basic Static Radial Load Rating Co:11000 N; Sealed Speed Rating n3:4500 rpm; D:85.0000 mm; Oil Speed Rating Open/Shielded n2:8500 rpm; Accessories:Two Shields; B:10.00 mm; Grease Speed Rating Open/Shielded n1:7000 rpm; d:65.000 mm; Fillet Radius ra:0.60 mm; |
| SMITH BCR-2-1/2-BC Cam Follower and Track Roller - Stud Type | P120°:1400 kN; Mass housing:138 kg; L:640 mm; Cap bolt, size:M 24x160; H:434 mm; Adapter sleeve:OH 3144 HTL; A1:240 mm; da:200 mm; P150°:1300 kN; End cover:ETS 3144 R; |
| SMITH DCR-2-1/2 Cam Follower and Track Roller - Stud Type | Weight:0.145 kg; rs:1.1 mm; Da:45 max; ra:1 max; Oil:17 000 min-1; B:15 mm; Static (Cor):7.811 kN; Bearing designation:6304 ; Grease:14 000 min-1; Pu:0.355 kN; |
| IKO CR24V Cam Follower and Track Roller - Stud Type | d:80.000 mm; Fillet Radius ra:2.00 mm; Accessories:One Seal & Snap-Ring; Basic Dynamic Radial Load Rating C:128000 N; Sealed Speed Rating n3:2800 rpm; Basic Static Radial Load Rating Co:160000 N; D:140.0000 mm; Grease Speed Rating n1:2800 rpm; Oil Speed Rating n2:3800 rpm; B:44.40 mm; |
| IKO CRH18VB Cam Follower and Track Roller - Stud Type | C:320 mm; Mass bearing:230 kg; D1 ≈:500 mm; Basic static load rating C0:12200 kN; Design variant/feature:BC4.10/W33WI; b:13.9 mm; D:540 mm; r1,2 min.:6 mm; Fatigue load limit Pu:1040 kN; d:390 mm; |
| SMITH BCR-1-XBC Cam Follower and Track Roller - Stud Type | Mass inner ring:0.038 kg; r, r1,2 min.:0.3 mm; d:35 mm; F:40 mm; B:17 mm; |
| IKO CR26VUU Cam Follower and Track Roller - Stud Type | B:25 mm; Bearing designation:6215 ; Oil:6 000 min-1; Weight:1.18 kg; da:82 min; Static (Cor):49.311 kN; Da:122 max; Grease:5 000 min-1; Dynamic (Cr):66.179 kN; ra:1.5 max; |
SMITH BCR-1-7/8-XC Cam Follower and Track Roller - Stud Type Video