| No. | Brand | h | a | H | J | L | G | K | s |
| H 128 LW | RBC BEARINGS | - | - | - | - | - | - | - | - |
| DCR-1-1/8 | SMITH | - | - | - | - | - | - | - | - |
| H 192 LW | RBC BEARINGS | - | - | - | - | - | - | - | - |
| CR8BUU | IKO | - | - | - | - | - | - | - | - |
| CR26BR | IKO | - | - | - | - | - | M 200x3 | - | - |
| H 128 | RBC BEARINGS | - | - | - | - | - | - | - | - |
| BCR-1-XC | SMITH | - | - | 112 mm | - | - | - | - | - |
| CR26VUUR | IKO | - | - | - | - | - | Tr 600x6 | - | - |
| DCR-2-1/2 | SMITH | - | - | - | - | - | - | - | - |
| BCR-1-1/8-XBC | SMITH | - | - | - | - | - | - | - | - |
| BCR-2-BC | SMITH | - | - | - | - | - | - | - | - |
| CRH16VUU | IKO | - | - | - | - | - | - | - | - |
| BCR-2-XC | SMITH | - | 20.871 mm | - | - | - | - | - | - |
| CS 64 LW | RBC BEARINGS | - | - | - | - | - | - | - | - |
| BCR-3-XC | SMITH | - | - | - | - | - | - | - | - |
| H 104 L | RBC BEARINGS | - | - | - | - | - | - | - | - |
| CR26UU | IKO | 8 mm | - | - | - | - | M 190x3 | - | - |
| CRH20VB | IKO | - | - | - | - | - | - | - | - |
| CS 64 LWX | RBC BEARINGS | - | - | - | - | - | - | - | - |
| BCR-1-3/4-XC | SMITH | - | 31.1 mm | - | - | - | - | - | - |
| CR26R | IKO | - | - | - | - | - | - | - | 4.5 mm |
| CS 88 L | RBC BEARINGS | - | - | - | - | - | M 125x2 | - | - |
| CR26VBR | IKO | - | - | - | - | - | - | - | - |
| BCR-2-3/4-BC | SMITH | 55.563 mm | - | - | - | - | - | - | - |
| CR26VUU | IKO | - | - | - | - | - | - | - | - |
| CRH18VBUUR | IKO | - | - | - | - | - | - | - | - |
| CR26VBUU | IKO | - | - | - | - | - | - | - | 2.4 mm |
| CR24VUUR | IKO | - | - | - | - | 749.3 mm | - | - | - |
| CS 96 LW | RBC BEARINGS | - | - | - | - | - | - | - | - |
| CS 60 LWX | RBC BEARINGS | - | - | - | - | - | M 72x4 | - | - |
| RBC BEARINGS CS 128 LW Cam Follower and Track Roller - Stud Type | B:21.00 mm; Grease Speed Rating n1:7500 rpm; d:35.000 mm; D:80.0000 mm; Fillet Radius ra:1.50 mm; Basic Dynamic Radial Load Rating C:39700 N; Basic Static Radial Load Rating Co:24500 N; Oil Speed Rating n2:10000 rpm; |
| SMITH DCR-2-3/4 Cam Follower and Track Roller - Stud Type | Fatigue load limit Pu:0.2 kN; B:27.4 mm; Thread grub screw G2:#10-32 UNF; Basic dynamic load rating C:9.56 kN; J7:11 mm; RG:1/4-28 UNF; DN:6.5 mm; L:57 mm; T:32.9 mm; R1:19 mm; |
| RBC BEARINGS CRBC 3 1/2 Cam Follower and Track Roller - Stud Type | S:3.175 mm; Bearing limiting speed:6300 r/min; Initial grease fill:68.04 g; Lock nut:AN 15; Labyrinth ring (dc shaft position):LOR 46; Ca:37.008 mm; J1:47.625 mm; Labyrinth ring (db shaft position):LOR 79; N1:15.875 mm; Mass pillow block:12.2 kg; |
| IKO CRH22VB Cam Follower and Track Roller - Stud Type | Housing:SSAFS 528; Ca:77.8 mm; Pa:28.5 kN; PG:1/4 NPT; da:123.825 mm; R1:87.313 mm; Da:250 mm; R2:38.1 mm; Stabilizing ring:SR-28-0; H1:152.4 mm; |
| IKO CRH16VBUUR Cam Follower and Track Roller - Stud Type | Sealed Speed Rating n3:4000 rpm; Fillet Radius ra:2.00 mm; Basic Static Radial Load Rating Co:45000 N; d:45.000 mm; Basic Dynamic Radial Load Rating C:76100 N; D:120.0000 mm; Accessories:Shield & Seal; Grease Speed Rating Open/Shielded n1:6000 rpm; Oil Speed Rating Open/Shielded n2:7000 rpm; B:29.00 mm; |
| IKO CR26VBR Cam Follower and Track Roller - Stud Type | Basic Static Radial Load Rating Co:22400 N; d:75.000 mm; Fillet Radius ra:1.00 mm; Accessories:One Seal; Grease Speed Rating Open/Shielded n1:6000 rpm; Basic Dynamic Radial Load Rating C:24200 N; Sealed Speed Rating n3:3600 rpm; Oil Speed Rating Open/Shielded n2:7000 rpm; D:105.0000 mm; B:16.00 mm; |
| RBC BEARINGS CRBC 3 1/4 Cam Follower and Track Roller - Stud Type | D:260.0000 mm; Oil Speed Rating n2:2200 rpm; B:110.00 mm; Fillet Radius ra:2.50 mm; Basic Static Radial Load Rating Co:530000 N; d:120.000 mm; Grease Speed Rating n1:1600 rpm; Basic Dynamic Radial Load Rating C:390000 N; Fillet Radius rb:1.00 mm; |
| IKO CR26BUU Cam Follower and Track Roller - Stud Type | Calculation factor Y1:3; d2 ≈:511 mm; Calculation factor e:0.22; d1:410 mm; B1:228 mm; Reference speed:560 r/min; Mass bearing + sleeve:235 kg; Ba min.:17 mm; b:22.3 mm; d3:520 mm; |
| RBC BEARINGS CS 160 LW Cam Follower and Track Roller - Stud Type | ba:70.644 mm; da:139.7 mm; Cap bolt recommended tightening torque:813.5 N·m; P90°:207 kN; Bearing:22232 CCK/W33; h:51.594 mm; RG:3/4 NPT; P60°:345 kN; P180°:145 kN; Housing:SSAFS 532; |
| IKO CR26V Cam Follower and Track Roller - Stud Type | J1:82.55 mm; Pa:26.7 kN; P90°:113 kN; A1:133.35 mm; P150°:68.1 kN; H1:152.4 mm; H:287.337 mm; da:100.013 mm; R1:79.375 mm; Appropriate attachment bolt size G:0.875 in; |
| IKO CR26R Cam Follower and Track Roller - Stud Type | B:41.28 mm; rs (min):1.5 mm; Dynamic (Ca):196 kN; Static (Coa):299 kN; s:4.5 mm; F:89 mm; d2:75 mm; b1:mm; E:mm; d2 (max):mm; |
| IKO CR26VBUU Cam Follower and Track Roller - Stud Type | rs (min):3 mm; b1:20.5 mm; b:12 mm; s:2.4 mm; d2:150 mm; Pu:44.420 kN; F:182 mm; Dynamic (Ca):369 kN; d2 (max):194.7 mm; E:mm; |
| IKO CR26VB Cam Follower and Track Roller - Stud Type | A:15 mm; B1:395 mm; d:800 mm; G1:50 mm; G2:G 1/4; G:Tr 850x7; Nut for removal:HM 31/850; d1:750 mm; Mass withdrawal sleeve:237 kg; B2:423 mm; |
| RBC BEARINGS CS 16 LWX Cam Follower and Track Roller - Stud Type | d:30 mm; B:13.6 mm; Oil:0 min-1; D:49.2 mm; Static (Coa):28.2 kN; Pu:1.282 kN; Grease:4 200 min-1; Dynamic (Ca):17.4 kN; |
SMITH BCR-2-1/4-XC Cam Follower and Track Roller - Stud Type Video