| RBC BEARINGS H 104 LW Cam Follower and Track Roller - Stud Type | B:1.5000 in; Fillet Radius ra:0.12 in; Basic Dynamic Radial Load Rating C:163000 N; d:8.500 in; Basic Static Radial Load Rating Co:232000 N; Fillet Radius rb:0.060 in; Grease Speed Rating n1:2000 rpm; D:11.5000 in; Oil Speed Rating n2:2800 rpm; |
| IKO CRH18VB Cam Follower and Track Roller - Stud Type | C:320 mm; Mass bearing:230 kg; D1 ≈:500 mm; Basic static load rating C0:12200 kN; Design variant/feature:BC4.10/W33WI; b:13.9 mm; D:540 mm; r1,2 min.:6 mm; Fatigue load limit Pu:1040 kN; d:390 mm; |
| IKO CR26B Cam Follower and Track Roller - Stud Type | D:170.0000 mm; Accessories:Two Shields; Basic Dynamic Radial Load Rating C:159000 N; Grease Speed Rating n1:2200 rpm; B:55.60 mm; d:95.000 mm; Basic Static Radial Load Rating Co:146000 N; Fillet Radius ra:2.00 mm; Sealed Speed Rating n3:2200 rpm; Oil Speed Rating n2:3200 rpm; |
| SMITH BCR-5/8-XC Cam Follower and Track Roller - Stud Type | Grease Speed Rating Open/Shielded n1:2100 rpm; D:265.0000 mm; d:100.000 mm; Oil Speed Rating Open/Shielded n2:2600 rpm; B:60.00 mm; Basic Static Radial Load Rating Co:300000 N; Basic Dynamic Radial Load Rating C:251000 N; Fillet Radius ra:3.00 mm; Accessories:Without Accessories; |
| IKO CR8BUU Cam Follower and Track Roller - Stud Type | A:40 mm; H2:16.5 mm; Fatigue load limit Pu:0.475 kN; Basic static load rating C0:11.2 kN; Thread grub screw G2:1/4-28 UNF; Hexagonal key size for grub screw N:3.175 mm; J min.:108 mm; N1:15.5 mm; End cover:ECW 206; Mass bearing unit:1.3 kg; |
| IKO CR24VUUR Cam Follower and Track Roller - Stud Type | PG:1/4 NPT; L:749.3 mm; RG:1 NPT; A1:203.2 mm; Ca:129.794 mm; N1:34.925 mm; S:4.763 mm; P90°:218 kN; Eye bolt:2 x 1/2-13 UNC; Bearing:22334 CCK/W33; |
| IKO CRH20VB Cam Follower and Track Roller - Stud Type | B:18.00 mm; Basic Static Radial Load Rating Co:31500 N; d:90.000 mm; D:125.0000 mm; Basic Dynamic Radial Load Rating C:32500 N; Fillet Radius ra:1.00 mm; Grease Speed Rating Open/Shielded n1:5000 rpm; Accessories:Two Seals; Oil Speed Rating Open/Shielded n2:6000 rpm; Sealed Speed Rating n3:3100 rpm; |
| SMITH BCR-1-7/8-BC Cam Follower and Track Roller - Stud Type | B1:3 mm; B:20 mm; Tolerance housing:H7; D1:26 mm; Specific static load factor K0:20 N/mm²; Permissible sliding velocity v min.:0.25 m/s; Mass bushing:0.026 kg; Tolerance shaft:h8; Coefficient of friction µ max.:0.1; Coefficient of friction µ min.:0.05; |
| SMITH BCR-1-XC Cam Follower and Track Roller - Stud Type | r1,2 min.:4 mm; Mass bearing:75 kg; Reference speed:260 r/min; Basic dynamic load rating C:2080 kN; D:520 mm; B:33.5 mm; Limiting speed:500 r/min; Basic static load rating C0:10000 kN; H:112 mm; ra max.:3 mm; |
| IKO CR8BR Cam Follower and Track Roller - Stud Type | S:0.794 mm; Limiting speed:5300 r/min; A3:20.637 mm; J:139.7 mm; A5:27.781 mm; A1:75.406 mm; B:73.025 mm; da:44.45 mm; Attachment bolt diameter G:12.7 mm; L:171.45 mm; |
| SMITH BCR-2-XC Cam Follower and Track Roller - Stud Type | Calculation factor e:0.4; C:18.824 mm; Da min.:98 mm; Db min.:105 mm; T:22 mm; ra max.:3.5 mm; r3,4 min.:1.3 mm; a:20.871 mm; d:63.5 mm; Cb min.:3 mm; |
| SMITH BCR-1-1/4-XBC Cam Follower and Track Roller - Stud Type | Permissible sliding velocity v min.:0 m/s; Tolerance shaft:f7 m/s; Specific dynamic load factor K:40 N/mm²; Specific static load factor K0:120 N/mm²; B:90 mm; D:95 mm; Permissible sliding velocity v max.:1 m/s; Tolerance housing:H7 m/s; Coefficient of friction µ max.:0.15; d:90 mm; |
| IKO CR26BUUR Cam Follower and Track Roller - Stud Type | Axial load factor Y:0.6; d:130 mm; Limiting speed:3800 r/min; Mass bearing:3.75 kg; Limiting value e:0.2; Reference speed:3800 r/min; r3,4 min.:1.1 mm; F:148 mm; d1 ≈:154 mm; da min.:137 mm; |
| SMITH BCR-1-3/4-XC Cam Follower and Track Roller - Stud Type | r3,4 min.:0.6 mm; d2:82.3 mm; rb max.:0.6 mm; Static axial stiffness, preload class D:496 N/µm; Calculation factor e:0.68; D:110 mm; a:31.1 mm; Calculation factor (single, tandem) Y2:0.87; Static axial stiffness, preload class A:212 N/µm; d1:82.3 mm; |