| No. | Brand | h | a | H | J | L | G | K | s |
| CR28B | IKO | - | - | - | - | - | - | - | - |
| H 112 L | RBC BEARINGS | - | - | - | - | - | - | - | - |
| CRBC 3 1/4 | RBC BEARINGS | - | - | - | - | - | - | - | - |
| CR24V | IKO | - | - | - | - | - | - | - | - |
| CS 64 L | RBC BEARINGS | - | - | - | - | - | - | - | - |
| H 104 LW | RBC BEARINGS | - | - | - | - | - | - | - | - |
| CR24VUU | IKO | 46.831 mm | - | - | - | 419.1 mm | - | - | - |
| H 128 | RBC BEARINGS | - | - | - | - | - | - | - | - |
| BCR-2-1/2-BC | SMITH | - | - | 434 mm | - | 640 mm | - | - | - |
| CS 60 LWX | RBC BEARINGS | - | - | - | - | - | M 72x4 | - | - |
| BCR-2-1/2-XC | SMITH | - | - | - | - | - | - | - | - |
| CS 128 L | RBC BEARINGS | - | - | - | - | - | - | - | - |
| DCR-2-3/4 | SMITH | - | - | - | - | 57 mm | - | - | - |
| H 18 LW | RBC BEARINGS | - | - | - | - | - | - | - | - |
| CR28 | IKO | - | - | - | - | - | - | - | - |
| CS 64 LWX | RBC BEARINGS | - | - | - | - | - | - | - | - |
| CR26BUU | IKO | - | - | - | - | - | - | - | - |
| BCR-1-3/8-XC | SMITH | 61.913 mm | - | 398.462 mm | - | - | - | - | - |
| BCR-5/8-XC | SMITH | - | - | - | - | - | - | - | - |
| CS 72 LW | RBC BEARINGS | - | - | - | - | - | - | - | - |
| CR26B | IKO | - | - | - | - | - | - | - | - |
| BCR-2-3/4-BC | SMITH | 55.563 mm | - | - | - | - | - | - | - |
| BCR-3-BC | SMITH | - | - | - | - | - | - | - | - |
| CR26VBUUR | IKO | - | - | - | - | - | - | - | - |
| CS 80 L | RBC BEARINGS | - | - | - | - | - | M 160x3 | - | - |
| BCR-3-XC | SMITH | - | - | - | - | - | - | - | - |
| SMITH BCR-1-1/4-XBC Cam Follower and Track Roller - Stud Type | Permissible sliding velocity v min.:0 m/s; Tolerance shaft:f7 m/s; Specific dynamic load factor K:40 N/mm²; Specific static load factor K0:120 N/mm²; B:90 mm; D:95 mm; Permissible sliding velocity v max.:1 m/s; Tolerance housing:H7 m/s; Coefficient of friction µ max.:0.15; d:90 mm; |
| RBC BEARINGS H 16 LW Cam Follower and Track Roller - Stud Type | Cap bolt recommended tightening torque:1220 N·m; A1:133.35 mm; P60°:189 kN; Mass pillow block:79.7 kg; Max. speed for Taconite seal:560 r/min; A2:277.813 mm; End plug (suffix Y):EPR 16; da:138.113 mm; Bearing:23032 CCK/W33; J1:82.55 mm; |
| SMITH DCR-2-1/4 Cam Follower and Track Roller - Stud Type | Basic dynamic load rating C:127 kN; d:45 mm; l2 max.:217 mm; G:M 42x3; h:163 mm; l7 min.:50 mm; dk:60 mm; d2 max.:104 mm; Material constant KM:330; Mass rod end:2.45 kg; |
| RBC BEARINGS CS 88 LW Cam Follower and Track Roller - Stud Type | Basic dynamic load rating C:2160 kN; Limiting speed:1500 r/min; d1:280 mm; Operating clearance factor k2:0.095; G1:26 mm; Ca min.:1.7 mm; d2 ≈:351 mm; Basic static load rating C0:3750 kN; da min.:307 mm; Fatigue load limit Pu:290 kN; |
| RBC BEARINGS H 104 LW Cam Follower and Track Roller - Stud Type | B:1.5000 in; Fillet Radius ra:0.12 in; Basic Dynamic Radial Load Rating C:163000 N; d:8.500 in; Basic Static Radial Load Rating Co:232000 N; Fillet Radius rb:0.060 in; Grease Speed Rating n1:2000 rpm; D:11.5000 in; Oil Speed Rating n2:2800 rpm; |
| SMITH BCR-1-7/8-XC Cam Follower and Track Roller - Stud Type | Mass bearing:930 kg; b:22.3 mm; B:355 mm; da min.:593 mm; Limiting speed:670 r/min; Fatigue load limit Pu:1320 kN; Reference speed:530 r/min; D1 ≈:814 mm; D:920 mm; d:560 mm; |
| IKO CR26R Cam Follower and Track Roller - Stud Type | B:41.28 mm; rs (min):1.5 mm; Dynamic (Ca):196 kN; Static (Coa):299 kN; s:4.5 mm; F:89 mm; d2:75 mm; b1:mm; E:mm; d2 (max):mm; |
| IKO CR8UU Cam Follower and Track Roller - Stud Type | Accessories:One Shield; Oil Speed Rating Open/Shielded n2:9000 rpm; d:60.000 mm; Basic Dynamic Radial Load Rating C:16500 N; Grease Speed Rating Open/Shielded n1:7500 rpm; B:13.00 mm; Sealed Speed Rating n3:4500 rpm; Fillet Radius ra:1.00 mm; Basic Static Radial Load Rating Co:14300 N; D:85.0000 mm; |
| SMITH BCR-1-XC Cam Follower and Track Roller - Stud Type | r1,2 min.:4 mm; Mass bearing:75 kg; Reference speed:260 r/min; Basic dynamic load rating C:2080 kN; D:520 mm; B:33.5 mm; Limiting speed:500 r/min; Basic static load rating C0:10000 kN; H:112 mm; ra max.:3 mm; |
| RBC BEARINGS CRBC 2 Cam Follower and Track Roller - Stud Type | da max.:45 mm; da min.:43.6 mm; dk:53 mm; Basic dynamic load rating C:100 kN; Specific static load factor K0:500 N/mm²; rb max.:1 mm; b:3.9 mm; Basic static load rating C0:500 kN; d:40 mm; Lubricant:Regular relubricatio; |
| RBC BEARINGS CS 64 L Cam Follower and Track Roller - Stud Type | F:10 mm; B:10 mm; d:6 mm; r, r1,2 min.:0.3 mm; Mass inner ring:0.0037 kg; |
| SMITH BCR-3-BC Cam Follower and Track Roller - Stud Type | Basic Dynamic Radial Load Rating:4380 lbf; Insert Bearing IB:ZMaRC; Distance J:1.8750 in; Width A:1.0625 in; Shaft Diameter D:1 1/8 in; Dimension F:0.5000 in; Weight W:1.10 lb; Dimension C:2.0625 in; Dimension B:5.4375 in; Distance H:1.250 in; |
| SMITH BCR-2-1/4-BC Cam Follower and Track Roller - Stud Type | B:130 mm; D:280 mm; Basic static load rating C0:1060 kN; d1 ≈:174 mm; C:128 mm; Maximum dynamic radial loads Fr max.:900 kN; K:6; Mass bearing:48.2 kg; D1 ≈:176 mm; d:110 mm; |
| IKO CRH22VB Cam Follower and Track Roller - Stud Type | Housing:SSAFS 528; Ca:77.8 mm; Pa:28.5 kN; PG:1/4 NPT; da:123.825 mm; R1:87.313 mm; Da:250 mm; R2:38.1 mm; Stabilizing ring:SR-28-0; H1:152.4 mm; |
RBC BEARINGS CS 128 LWX Cam Follower and Track Roller - Stud Type Video