| No. | Brand | h | a | H | J | L | G | K | s |
| CR28 | IKO | - | - | - | - | - | - | - | - |
| CS 88 L | RBC BEARINGS | - | - | - | - | - | M 125x2 | - | - |
| BCR-3-BC | SMITH | - | - | - | - | - | - | - | - |
| CR24VBUUR | IKO | - | - | - | - | - | - | - | - |
| CS 112 LWX | RBC BEARINGS | - | - | - | - | - | - | - | - |
| BCR-1-1/8-XBC | SMITH | - | - | - | - | - | - | - | - |
| CRH20V | IKO | - | - | - | - | - | - | - | - |
| CS 112 L | RBC BEARINGS | - | - | - | - | - | M 180x3 | - | - |
| CS 104 LW | RBC BEARINGS | - | - | - | - | - | - | - | - |
| CRH20VUU | IKO | - | - | - | - | - | - | - | - |
| CS 88 LW | RBC BEARINGS | - | - | - | - | - | - | - | - |
| CS 64 L | RBC BEARINGS | - | - | - | - | - | - | - | - |
| BCR-1-1/2-XC | SMITH | - | - | - | - | - | - | - | - |
| CS 60 LWX | RBC BEARINGS | - | - | - | - | - | M 72x4 | - | - |
| CS 128 L | RBC BEARINGS | - | - | - | - | - | - | - | - |
| H 20 LW | RBC BEARINGS | - | 80 mm | - | - | - | - | - | - |
| DCR-1-1/4 | SMITH | - | - | - | - | 387.35 mm | - | - | - |
| CR28B | IKO | - | - | - | - | - | - | - | - |
| BCR-5/8-XC | SMITH | - | - | - | - | - | - | - | - |
| CS 20 LW | RBC BEARINGS | - | - | - | - | - | - | 8.5 mm | - |
| CS 128 LW | RBC BEARINGS | - | - | - | - | - | - | - | - |
| CR26B | IKO | - | - | - | - | - | - | - | - |
| CRH18V | IKO | - | - | - | - | - | - | - | - |
| DCR-1 | SMITH | - | - | - | - | - | - | 4.5 mm | - |
| SMITH BCR-1-7/8-XC Cam Follower and Track Roller - Stud Type | Mass bearing:930 kg; b:22.3 mm; B:355 mm; da min.:593 mm; Limiting speed:670 r/min; Fatigue load limit Pu:1320 kN; Reference speed:530 r/min; D1 ≈:814 mm; D:920 mm; d:560 mm; |
| SMITH BCR-1-1/8-XC Cam Follower and Track Roller - Stud Type | Cap bolt:2 x 3/4-10 UNC; P90°:81.4 kN; Adapter sleeve assembly:SNW 3024x4.1/4; da:107.95 mm; P60°:136 kN; Initial grease fill:181.44 g; N1:25.4 mm; Bearing limiting speed:4000 r/min; A2:155.575 mm; P120°:50.7 kN; |
| SMITH BCR-1-5/8-XC Cam Follower and Track Roller - Stud Type | Accessories:Seal & Snap-Ring; Oil Speed Rating Open/Shielded n2:5300 rpm; Grease Speed Rating Open/Shielded n1:4500 rpm; D:145.0000 mm; d:95.000 mm; Basic Dynamic Radial Load Rating C:63700 N; Sealed Speed Rating n3:2800 rpm; Basic Static Radial Load Rating Co:54000 N; B:24.00 mm; Fillet Radius ra:1.50 mm; |
| IKO CR26VUUR Cam Follower and Track Roller - Stud Type | D1 ≈:761 mm; ra max.:5 mm; G:Tr 600x6; Reference speed:530 r/min; Basic static load rating C0:11000 kN; Mass bearing + sleeve:415 kg; D:820 mm; r1,2 min.:6 mm; s1 max.:45.7 mm; B2 ≈:252 mm; |
| RBC BEARINGS CS 112 LW Cam Follower and Track Roller - Stud Type | D:170.0000 mm; Basic Dynamic Radial Load Rating C:111000 N; Basic Static Radial Load Rating Co:118000 N; Grease Speed Rating Open/Shielded n1:3100 rpm; d:95.000 mm; Accessories:Two Shields; B:32.00 mm; Oil Speed Rating Open/Shielded n2:3800 rpm; Fillet Radius ra:2.00 mm; |
| IKO CRH18V Cam Follower and Track Roller - Stud Type | D:200.0000 mm; Basic Dynamic Radial Load Rating C:190000 N; Fillet Radius ra:2.50 mm; d:80.000 mm; Basic Static Radial Load Rating Co:170000 N; Fillet Radius rb:1.00 mm; B:48.00 mm; Oil Speed Rating n2:4100 rpm; Grease Speed Rating n1:3200 rpm; |
| SMITH BCR-1-1/4-XC Cam Follower and Track Roller - Stud Type | G:M 52x3; dk:80 mm; α:6 °; B:44 mm; l7 min.:70 mm; w:70 mm; Mass rod end:6.3 kg; C1 max.:39 mm; h1:175 mm; d4 ≈:82 mm; |
| IKO CR26VBUU Cam Follower and Track Roller - Stud Type | rs (min):3 mm; b1:20.5 mm; b:12 mm; s:2.4 mm; d2:150 mm; Pu:44.420 kN; F:182 mm; Dynamic (Ca):369 kN; d2 (max):194.7 mm; E:mm; |
| IKO CR24VBR Cam Follower and Track Roller - Stud Type | A1:120.65 mm; P150°:66.7 kN; Pa:14 kN; J1:69.85 mm; P90°:111 kN; Cap bolt recommended tightening torque:1220 N·m; A2:187.325 mm; Cap bolt:2 x 1-8 UNC; P60°:185 kN; Bearing limiting speed:4000 r/min; |
| RBC BEARINGS CS 96 LW Cam Follower and Track Roller - Stud Type | d3 max.:75.54 mm; B1:46.609 mm; B:12.954 mm; Hydraulic nut:HMVC 11E; d1:49.212 mm; Lock washer:W 11; Sleeve:S 11x1.15/16; Threads per inch:18; B4:14.3 mm; d:55 mm; |
| RBC BEARINGS H 192 LW Cam Follower and Track Roller - Stud Type | B1:9 mm; B2:16 mm; d:60 mm; d1 ≈:84.35 mm; Mass angle ring:0.24 kg; r3,4 min.:2.1 mm; |
| SMITH BCR-1-1/4-XBC Cam Follower and Track Roller - Stud Type | Permissible sliding velocity v min.:0 m/s; Tolerance shaft:f7 m/s; Specific dynamic load factor K:40 N/mm²; Specific static load factor K0:120 N/mm²; B:90 mm; D:95 mm; Permissible sliding velocity v max.:1 m/s; Tolerance housing:H7 m/s; Coefficient of friction µ max.:0.15; d:90 mm; |
| IKO CR8BR Cam Follower and Track Roller - Stud Type | S:0.794 mm; Limiting speed:5300 r/min; A3:20.637 mm; J:139.7 mm; A5:27.781 mm; A1:75.406 mm; B:73.025 mm; da:44.45 mm; Attachment bolt diameter G:12.7 mm; L:171.45 mm; |
| RBC BEARINGS CS 160 LW Cam Follower and Track Roller - Stud Type | ba:70.644 mm; da:139.7 mm; Cap bolt recommended tightening torque:813.5 N·m; P90°:207 kN; Bearing:22232 CCK/W33; h:51.594 mm; RG:3/4 NPT; P60°:345 kN; P180°:145 kN; Housing:SSAFS 532; |
RBC BEARINGS CS 16 LW Cam Follower and Track Roller - Stud Type Video