| No. | Brand | h | a | H | J | L | G | K | s |
| CS 88 L | RBC BEARINGS | - | - | - | - | - | M 125x2 | - | - |
| H 112 L | RBC BEARINGS | - | - | - | - | - | - | - | - |
| CS 20 LW | RBC BEARINGS | - | - | - | - | - | - | 8.5 mm | - |
| CRH22V | IKO | - | - | - | - | - | - | - | - |
| CRBC 2 | RBC BEARINGS | - | - | - | - | - | - | - | - |
| CR26BUU | IKO | - | - | - | - | - | - | - | - |
| H 112 LW | RBC BEARINGS | - | - | - | - | - | - | - | - |
| CS 128 L | RBC BEARINGS | - | - | - | - | - | - | - | - |
| CR24VR | IKO | - | - | - | - | - | - | - | - |
| DCR-2-3/4 | SMITH | - | - | - | - | 57 mm | - | - | - |
| DCR-1 | SMITH | - | - | - | - | - | - | 4.5 mm | - |
| BCR-1-1/4-XBC | SMITH | - | - | - | - | - | - | - | - |
| BCR-3/4-XBC | SMITH | - | - | - | - | - | - | - | - |
| CRH20VBUUR | IKO | - | - | - | - | - | - | - | - |
| CR26VBR | IKO | - | - | - | - | - | - | - | - |
| DCR-1-3/8 | SMITH | - | - | - | - | - | - | - | - |
| H 18 LW | RBC BEARINGS | - | - | - | - | - | - | - | - |
| DCR-1-5/8 | SMITH | - | - | - | - | - | - | - | - |
| CR26UU | IKO | 8 mm | - | - | - | - | M 190x3 | - | - |
| CRBC 2 1/2 | RBC BEARINGS | - | - | - | - | - | - | - | - |
| CRH18VBUUR | IKO | - | - | - | - | - | - | - | - |
| IKO CRH16VBUUR Cam Follower and Track Roller - Stud Type | Sealed Speed Rating n3:4000 rpm; Fillet Radius ra:2.00 mm; Basic Static Radial Load Rating Co:45000 N; d:45.000 mm; Basic Dynamic Radial Load Rating C:76100 N; D:120.0000 mm; Accessories:Shield & Seal; Grease Speed Rating Open/Shielded n1:6000 rpm; Oil Speed Rating Open/Shielded n2:7000 rpm; B:29.00 mm; |
| RBC BEARINGS CS 112 L Cam Follower and Track Roller - Stud Type | Hydraulic nut:HMV 36 E; d:180 mm; B:34 mm; G:M 180x3; Lock nut:KMFE 36; Mass adapter sleeve assembly:7.2 kg; d1:163.512 mm; d3:230 mm; B1:122 mm; |
| RBC BEARINGS CS 96 LW Cam Follower and Track Roller - Stud Type | d3 max.:75.54 mm; B1:46.609 mm; B:12.954 mm; Hydraulic nut:HMVC 11E; d1:49.212 mm; Lock washer:W 11; Sleeve:S 11x1.15/16; Threads per inch:18; B4:14.3 mm; d:55 mm; |
| RBC BEARINGS CRBC 2 1/2 Cam Follower and Track Roller - Stud Type | Accessories:Two Seals & Snap-Rin; Basic Static Radial Load Rating Co:29000 N; Basic Dynamic Radial Load Rating C:41600 N; D:72.0000 mm; B:30.20 mm; Sealed Speed Rating n3:6300 rpm; d:30.000 mm; Grease Speed Rating n1:6300 rpm; Fillet Radius ra:1.00 mm; Oil Speed Rating n2:8500 rpm; |
| IKO CRH20V Cam Follower and Track Roller - Stud Type | Distance J:4.5938 in; Basic Dynamic Radial Load Rating:4380 lbf; Dimension A1:1.2813 in; Insert Bearing IB:ZMaRC; Dimension L:3.2656 in; Weight W:0.93 lb; Basic Static Radial Load Rating Co:2520 lbf; Diameter N:0.2969 in; Dimension A2:0.5938 in; Shaft Diameter D:1 3/16 in; |
| SMITH BCR-1-XBC Cam Follower and Track Roller - Stud Type | Mass inner ring:0.038 kg; r, r1,2 min.:0.3 mm; d:35 mm; F:40 mm; B:17 mm; |
| RBC BEARINGS CS 160 LW Cam Follower and Track Roller - Stud Type | ba:70.644 mm; da:139.7 mm; Cap bolt recommended tightening torque:813.5 N·m; P90°:207 kN; Bearing:22232 CCK/W33; h:51.594 mm; RG:3/4 NPT; P60°:345 kN; P180°:145 kN; Housing:SSAFS 532; |
| SMITH DCR-2 Cam Follower and Track Roller - Stud Type | Calculation factor e:0.35; Calculation factor Y1:1.9; Reference speed:3200 r/min; Calculation factor Y2:2.9; D1 ≈:135 mm; Fatigue load limit Pu:48 kN; Da max.:148 mm; d3:98 mm; d1:65 mm; B1:73 mm; |
| RBC BEARINGS CS 72 LW Cam Follower and Track Roller - Stud Type | d:12.000 mm; Basic Dynamic Radial Load Rating C:9750 N; Grease Speed Rating n1:19000 rpm; Oil Speed Rating Open/Shielded n2:24000 rpm; B:12.00 mm; Basic Static Radial Load Rating Co:4150 N; Oil Speed Rating n2:24000 rpm; D:37.0000 mm; Sealed Speed Rating n3:14000 rpm; Grease Speed Rating Open/Shielded n1:19000 rpm; |
| SMITH BCR-1/2-XBC Cam Follower and Track Roller - Stud Type | Oil Speed Rating Open/Shielded n2:2200 rpm; Fillet Radius ra:2.00 mm; Accessories:Two Shields; Basic Dynamic Radial Load Rating C:159000 N; B:38.00 mm; Grease Speed Rating Open/Shielded n1:1800 rpm; d:240.000 mm; D:320.0000 mm; Sealed Speed Rating n3:1100 rpm; Basic Static Radial Load Rating Co:196000 N; |
| SMITH DCR-2-1/2 Cam Follower and Track Roller - Stud Type | Weight:0.145 kg; rs:1.1 mm; Da:45 max; ra:1 max; Oil:17 000 min-1; B:15 mm; Static (Cor):7.811 kN; Bearing designation:6304 ; Grease:14 000 min-1; Pu:0.355 kN; |
| SMITH BCR-2-XC Cam Follower and Track Roller - Stud Type | Calculation factor e:0.4; C:18.824 mm; Da min.:98 mm; Db min.:105 mm; T:22 mm; ra max.:3.5 mm; r3,4 min.:1.3 mm; a:20.871 mm; d:63.5 mm; Cb min.:3 mm; |
| IKO CR26R Cam Follower and Track Roller - Stud Type | B:41.28 mm; rs (min):1.5 mm; Dynamic (Ca):196 kN; Static (Coa):299 kN; s:4.5 mm; F:89 mm; d2:75 mm; b1:mm; E:mm; d2 (max):mm; |
| IKO CR26VR Cam Follower and Track Roller - Stud Type | F:135 mm; ra max.:2 mm; Basic static load rating C0:183 kN; Mass bearing:2.47 kg; r3,4 min.:1.1 mm; Fatigue load limit Pu:20.8 kN; D1 ≈:158.85 mm; rb max.:1 mm; s max.:3.8 mm; Axial load factor Y:0.6; |
RBC BEARINGS CS 16 LWX Cam Follower and Track Roller - Stud Type Video