| No. | Brand | h | a | H | J | L | G | K | s |
| BCR-3/4-XC | SMITH | - | - | - | - | - | - | - | - |
| BCR-2-1/2-BC | SMITH | - | - | 434 mm | - | 640 mm | - | - | - |
| CRH20VB | IKO | - | - | - | - | - | - | - | - |
| CS 72 LWX | RBC BEARINGS | - | - | - | - | - | - | - | - |
| BCR-1-3/4-XC | SMITH | - | 31.1 mm | - | - | - | - | - | - |
| DCR-1 | SMITH | - | - | - | - | - | - | 4.5 mm | - |
| CR26VR | IKO | - | - | - | - | - | - | - | - |
| CR26VBR | IKO | - | - | - | - | - | - | - | - |
| CRH20V | IKO | - | - | - | - | - | - | - | - |
| CS 104 L | RBC BEARINGS | 2 mm | - | - | - | - | M 20x1 | - | - |
| CS 128 LWX | RBC BEARINGS | - | - | - | - | - | - | - | - |
| CS 128 LW | RBC BEARINGS | - | - | - | - | - | - | - | - |
| CRH22V | IKO | - | - | - | - | - | - | - | - |
| BCR-3/4-XBC | SMITH | - | - | - | - | - | - | - | - |
| CR24VUUR | IKO | - | - | - | - | 749.3 mm | - | - | - |
| CR26VBUUR | IKO | - | - | - | - | - | - | - | - |
| CS 88 LWX | RBC BEARINGS | - | - | - | - | - | - | - | - |
| H 16 LW | RBC BEARINGS | - | - | - | - | - | - | - | - |
| CR24UUR | IKO | - | - | - | - | - | - | 7.5 mm | - |
| H 20 LW | RBC BEARINGS | - | 80 mm | - | - | - | - | - | - |
| CR26B | IKO | - | - | - | - | - | - | - | - |
| H 112 LW | RBC BEARINGS | - | - | - | - | - | - | - | - |
| BCR-1-7/8-XC | SMITH | - | - | - | - | - | - | - | - |
| CRBC 7 | RBC BEARINGS | - | - | - | - | - | - | - | - |
| IKO CR26VBR Cam Follower and Track Roller - Stud Type | Basic Static Radial Load Rating Co:22400 N; d:75.000 mm; Fillet Radius ra:1.00 mm; Accessories:One Seal; Grease Speed Rating Open/Shielded n1:6000 rpm; Basic Dynamic Radial Load Rating C:24200 N; Sealed Speed Rating n3:3600 rpm; Oil Speed Rating Open/Shielded n2:7000 rpm; D:105.0000 mm; B:16.00 mm; |
| RBC BEARINGS H 16 LW Cam Follower and Track Roller - Stud Type | Cap bolt recommended tightening torque:1220 N·m; A1:133.35 mm; P60°:189 kN; Mass pillow block:79.7 kg; Max. speed for Taconite seal:560 r/min; A2:277.813 mm; End plug (suffix Y):EPR 16; da:138.113 mm; Bearing:23032 CCK/W33; J1:82.55 mm; |
| IKO CRH20VBUUR Cam Follower and Track Roller - Stud Type | rs Dynamic (Cr):1.5 mm; B1:mm; D:90 mm; d:40 mm; Oil:6 700 min-1; with cylindrical bore:7 900 min-1; Grease:0.600 kN; Pu:13.300 kN; Static (Cor):46.140 kN; with tapered bore:2308 ; |
| IKO CR26BUU Cam Follower and Track Roller - Stud Type | Calculation factor Y1:3; d2 ≈:511 mm; Calculation factor e:0.22; d1:410 mm; B1:228 mm; Reference speed:560 r/min; Mass bearing + sleeve:235 kg; Ba min.:17 mm; b:22.3 mm; d3:520 mm; |
| SMITH DCR-1-1/8 Cam Follower and Track Roller - Stud Type | B:16 mm; Calculation factor f1:0.99; Calculation factor (back-to-back, face-to-face) Y1:0.92; Basic dynamic load rating C:12.1 kN; d1:55.7 mm; D:75 mm; Static axial stiffness, preload class B:156 N/µm; Mass bearing:0.22 kg; Calculation factor fHC:1.01; Ball diameter Dw:7.144 mm; |
| RBC BEARINGS CS 128 L Cam Follower and Track Roller - Stud Type | D:180.0000 mm; Basic Dynamic Radial Load Rating C:143000 N; B:42.00 mm; Accessories:Two Shields; Oil Speed Rating Open/Shielded n2:4500 rpm; Sealed Speed Rating n3:2600 rpm; Grease Speed Rating Open/Shielded n1:3800 rpm; Fillet Radius ra:2.50 mm; d:70.000 mm; Basic Static Radial Load Rating Co:104000 N; |
| RBC BEARINGS CS 72 LW Cam Follower and Track Roller - Stud Type | d:12.000 mm; Basic Dynamic Radial Load Rating C:9750 N; Grease Speed Rating n1:19000 rpm; Oil Speed Rating Open/Shielded n2:24000 rpm; B:12.00 mm; Basic Static Radial Load Rating Co:4150 N; Oil Speed Rating n2:24000 rpm; D:37.0000 mm; Sealed Speed Rating n3:14000 rpm; Grease Speed Rating Open/Shielded n1:19000 rpm; |
| SMITH BCR-1-1/2-XC Cam Follower and Track Roller - Stud Type | da max.:79 mm; Fatigue load limit Pu:21.2 kN; Da max.:111 mm; Basic static load rating C0:180 kN; Limiting speed:7500 r/min; B1:50 mm; Mass bearing + sleeve:1.8 kg; d1:60 mm; Basic dynamic load rating C:180 kN; B:31 mm; |
| SMITH DCR-1 Cam Follower and Track Roller - Stud Type | Limiting speed:800 r/min; d1:115 mm; Calculation factor Y2:4.8; Calculation factor Y1:3.2; Calculation factor e:0.21; D:200 mm; Da max.:191 mm; K:4.5 mm; da max.:145 mm; B2:28 mm; |
| SMITH BCR-2-XC Cam Follower and Track Roller - Stud Type | Calculation factor e:0.4; C:18.824 mm; Da min.:98 mm; Db min.:105 mm; T:22 mm; ra max.:3.5 mm; r3,4 min.:1.3 mm; a:20.871 mm; d:63.5 mm; Cb min.:3 mm; |
| SMITH DCR-1-1/4 Cam Follower and Track Roller - Stud Type | Stabilizing ring:2 x 38151-24; L:387.35 mm; N1:26.988 mm; Cap bolt recommended tightening torque:298.3 N·m; Ca:55.804 mm; Cap bolt, SAE grade:8; PG:1/4 NPT; Initial grease fill:181.44 g; P60°:141 kN; P150°:48 kN; |
| SMITH BCR-5/8-XBC Cam Follower and Track Roller - Stud Type | Mass angle ring:1.25 kg; B1:12 mm; d1 ≈:193.3 mm; d:150 mm; r3,4 min.:3 mm; B2:19.5 mm; |
| RBC BEARINGS H 112 L Cam Follower and Track Roller - Stud Type | D:140.0000 mm; Fillet Radius rb:1.00 mm; Fillet Radius ra:2.00 mm; d:65.000 mm; Angle Third:40 º; Basic Static Radial Load Rating 40 AA Pair Co1:224000 N; Basic Static Radial Load Rating 15 B Bearing Co2:80000 N; Grease Speed Rating n1:4300 rpm; Oil Speed Rating n2:5600 rpm; Basic Dynamic Radial Load Rating 15 B Bearing C2:108000 N; |
| RBC BEARINGS CS 112 LW Cam Follower and Track Roller - Stud Type | D:170.0000 mm; Basic Dynamic Radial Load Rating C:111000 N; Basic Static Radial Load Rating Co:118000 N; Grease Speed Rating Open/Shielded n1:3100 rpm; d:95.000 mm; Accessories:Two Shields; B:32.00 mm; Oil Speed Rating Open/Shielded n2:3800 rpm; Fillet Radius ra:2.00 mm; |
RBC BEARINGS H 20 LW Cam Follower and Track Roller - Stud Type Video