| No. | Brand | h | a | H | J | L | G | K | s |
| BCR-1-3/4-XC | SMITH | - | 31.1 mm | - | - | - | - | - | - |
| BCR-3/4-XBC | SMITH | - | - | - | - | - | - | - | - |
| CRBC 6 | RBC BEARINGS | - | - | - | - | - | - | - | - |
| CS 128 LW | RBC BEARINGS | - | - | - | - | - | - | - | - |
| BCR-1/2-XC | SMITH | - | - | - | - | - | - | 15 mm | - |
| CS 64 LWX | RBC BEARINGS | - | - | - | - | - | - | - | - |
| DCR-2-1/2 | SMITH | - | - | - | - | - | - | - | - |
| BCR-2-BC | SMITH | - | - | - | - | - | - | - | - |
| CRBC 7 | RBC BEARINGS | - | - | - | - | - | - | - | - |
| CR24UUR | IKO | - | - | - | - | - | - | 7.5 mm | - |
| H 112 | RBC BEARINGS | - | - | - | - | - | - | - | - |
| H 128 | RBC BEARINGS | - | - | - | - | - | - | - | - |
| CS 72 LWX | RBC BEARINGS | - | - | - | - | - | - | - | - |
| CRH22VBUU | IKO | - | - | - | - | - | - | - | - |
| H 128 L | RBC BEARINGS | - | - | - | - | - | - | - | - |
| CR28B | IKO | - | - | - | - | - | - | - | - |
| H 18 LW | RBC BEARINGS | - | - | - | - | - | - | - | - |
| CS 64 L | RBC BEARINGS | - | - | - | - | - | - | - | - |
| CR26VBUU | IKO | - | - | - | - | - | - | - | 2.4 mm |
| CS 64 LW | RBC BEARINGS | - | - | - | - | - | - | - | - |
| DCR-2-3/4 | SMITH | - | - | - | - | 57 mm | - | - | - |
| CRH18V | IKO | - | - | - | - | - | - | - | - |
| DCR-1-7/8 | SMITH | - | - | - | - | - | - | - | - |
| BCR-1-7/8-XC | SMITH | - | - | - | - | - | - | - | - |
| CS 96 L | RBC BEARINGS | - | - | - | - | - | - | - | - |
| BCR-5/8-XBC | SMITH | - | - | - | - | - | - | - | - |
| CR8BR | IKO | - | - | - | 139.7 mm | 171.45 mm | - | - | - |
| CS 16 LW | RBC BEARINGS | - | - | - | - | - | - | - | - |
| BCR-5/8-XC | SMITH | - | - | - | - | - | - | - | - |
| SMITH DCR-1-3/8 Cam Follower and Track Roller - Stud Type | d1:56.44 mm; C2:3.6 mm; Calculation factor f1:1; Static axial stiffness, preload class B:40 N/µm; Ball diameter Dw:5.556 mm; Da max.:70.4 mm; Static axial stiffness, preload class C:64 N/µm; Preload class C GC:185 N; D:75 mm; Calculation factor f:1.05; |
| IKO CRH20VB Cam Follower and Track Roller - Stud Type | B:18.00 mm; Basic Static Radial Load Rating Co:31500 N; d:90.000 mm; D:125.0000 mm; Basic Dynamic Radial Load Rating C:32500 N; Fillet Radius ra:1.00 mm; Grease Speed Rating Open/Shielded n1:5000 rpm; Accessories:Two Seals; Oil Speed Rating Open/Shielded n2:6000 rpm; Sealed Speed Rating n3:3100 rpm; |
| RBC BEARINGS CS 96 LW Cam Follower and Track Roller - Stud Type | d3 max.:75.54 mm; B1:46.609 mm; B:12.954 mm; Hydraulic nut:HMVC 11E; d1:49.212 mm; Lock washer:W 11; Sleeve:S 11x1.15/16; Threads per inch:18; B4:14.3 mm; d:55 mm; |
| RBC BEARINGS H 112 Cam Follower and Track Roller - Stud Type | Basic Static Radial Load Rating Co:81500 N; Sealed Speed Rating n3:2400 rpm; D:170.0000 mm; Basic Dynamic Radial Load Rating C:108000 N; Oil Speed Rating Open/Shielded n2:4300 rpm; B:32.00 mm; Oil Speed Rating n2:4300 rpm; Accessories:Two Seals; Fillet Radius ra:2.00 mm; d:95.000 mm; |
| SMITH BCR-1-5/8-XC Cam Follower and Track Roller - Stud Type | Accessories:Seal & Snap-Ring; Oil Speed Rating Open/Shielded n2:5300 rpm; Grease Speed Rating Open/Shielded n1:4500 rpm; D:145.0000 mm; d:95.000 mm; Basic Dynamic Radial Load Rating C:63700 N; Sealed Speed Rating n3:2800 rpm; Basic Static Radial Load Rating Co:54000 N; B:24.00 mm; Fillet Radius ra:1.50 mm; |
| SMITH BCR-5/8-XBC Cam Follower and Track Roller - Stud Type | Mass angle ring:1.25 kg; B1:12 mm; d1 ≈:193.3 mm; d:150 mm; r3,4 min.:3 mm; B2:19.5 mm; |
| SMITH BCR-3-BC Cam Follower and Track Roller - Stud Type | Basic Dynamic Radial Load Rating:4380 lbf; Insert Bearing IB:ZMaRC; Distance J:1.8750 in; Width A:1.0625 in; Shaft Diameter D:1 1/8 in; Dimension F:0.5000 in; Weight W:1.10 lb; Dimension C:2.0625 in; Dimension B:5.4375 in; Distance H:1.250 in; |
| RBC BEARINGS CS 20 LW Cam Follower and Track Roller - Stud Type | Calculation factor Y2:1.2; Basic dynamic load rating C:194 kN; K:8.5 mm; Calculation factor e:0.83; Da max.:92 mm; d:45 mm; Da min.:79 mm; Basic static load rating C0:204 kN; ra max.:1.5 mm; Calculation factor Y0:0.8; |
| SMITH DCR-2-1/4 Cam Follower and Track Roller - Stud Type | Basic dynamic load rating C:127 kN; d:45 mm; l2 max.:217 mm; G:M 42x3; h:163 mm; l7 min.:50 mm; dk:60 mm; d2 max.:104 mm; Material constant KM:330; Mass rod end:2.45 kg; |
| IKO CR26BUUR Cam Follower and Track Roller - Stud Type | Axial load factor Y:0.6; d:130 mm; Limiting speed:3800 r/min; Mass bearing:3.75 kg; Limiting value e:0.2; Reference speed:3800 r/min; r3,4 min.:1.1 mm; F:148 mm; d1 ≈:154 mm; da min.:137 mm; |
| RBC BEARINGS CS 128 LWX Cam Follower and Track Roller - Stud Type | Grease Speed Rating n1:5000 rpm; Oil Speed Rating n2:6700 rpm; D:90.0000 mm; Sealed Speed Rating n3:5000 rpm; Accessories:One Shield & Snap-Ri; Basic Dynamic Radial Load Rating C:67100 N; Basic Static Radial Load Rating Co:65500 N; Fillet Radius ra:1.50 mm; B:39.70 mm; d:40.000 mm; |
| SMITH DCR-1-1/8 Cam Follower and Track Roller - Stud Type | B:16 mm; Calculation factor f1:0.99; Calculation factor (back-to-back, face-to-face) Y1:0.92; Basic dynamic load rating C:12.1 kN; d1:55.7 mm; D:75 mm; Static axial stiffness, preload class B:156 N/µm; Mass bearing:0.22 kg; Calculation factor fHC:1.01; Ball diameter Dw:7.144 mm; |
| IKO CR26V Cam Follower and Track Roller - Stud Type | J1:82.55 mm; Pa:26.7 kN; P90°:113 kN; A1:133.35 mm; P150°:68.1 kN; H1:152.4 mm; H:287.337 mm; da:100.013 mm; R1:79.375 mm; Appropriate attachment bolt size G:0.875 in; |
| IKO CR26VB Cam Follower and Track Roller - Stud Type | A:15 mm; B1:395 mm; d:800 mm; G1:50 mm; G2:G 1/4; G:Tr 850x7; Nut for removal:HM 31/850; d1:750 mm; Mass withdrawal sleeve:237 kg; B2:423 mm; |
RBC BEARINGS CS 72 L Cam Follower and Track Roller - Stud Type Video