| No. | Brand | h | a | H | J | L | G | K | s |
| CRBC 6 | RBC BEARINGS | - | - | - | - | - | - | - | - |
| BCR-5/8-XC | SMITH | - | - | - | - | - | - | - | - |
| CR24V | IKO | - | - | - | - | - | - | - | - |
| CS 80 LW | RBC BEARINGS | - | - | - | - | - | - | - | - |
| H 20 LW | RBC BEARINGS | - | 80 mm | - | - | - | - | - | - |
| BCR-2-3/4-XC | SMITH | - | - | - | - | - | - | - | - |
| BCR-3-XC | SMITH | - | - | - | - | - | - | - | - |
| CR8BUU | IKO | - | - | - | - | - | - | - | - |
| DCR-2-1/4 | SMITH | 163 mm | - | - | - | - | M 42x3 | - | - |
| CS 160 LW | RBC BEARINGS | 51.594 mm | - | - | - | - | - | - | - |
| CR26UU | IKO | 8 mm | - | - | - | - | M 190x3 | - | - |
| CRBC 3 1/4 | RBC BEARINGS | - | - | - | - | - | - | - | - |
| BCR-2-XC | SMITH | - | 20.871 mm | - | - | - | - | - | - |
| BCR-2-BC | SMITH | - | - | - | - | - | - | - | - |
| CRH16VUU | IKO | - | - | - | - | - | - | - | - |
| CR26VR | IKO | - | - | - | - | - | - | - | - |
| CRBC 2 1/2 | RBC BEARINGS | - | - | - | - | - | - | - | - |
| CR24UUR | IKO | - | - | - | - | - | - | 7.5 mm | - |
| BCR-1-1/8-XBC | SMITH | - | - | - | - | - | - | - | - |
| DCR-2 | SMITH | - | - | - | - | - | - | - | - |
| BCR-1-XBC | SMITH | - | - | - | - | - | - | - | - |
| H 112 | RBC BEARINGS | - | - | - | - | - | - | - | - |
| CRH20VB | IKO | - | - | - | - | - | - | - | - |
| CR26VB | IKO | - | - | - | - | - | Tr 850x7 | - | - |
| SMITH BCR-1-1/8-XC Cam Follower and Track Roller - Stud Type | Cap bolt:2 x 3/4-10 UNC; P90°:81.4 kN; Adapter sleeve assembly:SNW 3024x4.1/4; da:107.95 mm; P60°:136 kN; Initial grease fill:181.44 g; N1:25.4 mm; Bearing limiting speed:4000 r/min; A2:155.575 mm; P120°:50.7 kN; |
| SMITH DCR-2-1/4 Cam Follower and Track Roller - Stud Type | Basic dynamic load rating C:127 kN; d:45 mm; l2 max.:217 mm; G:M 42x3; h:163 mm; l7 min.:50 mm; dk:60 mm; d2 max.:104 mm; Material constant KM:330; Mass rod end:2.45 kg; |
| IKO CR26VUU Cam Follower and Track Roller - Stud Type | B:25 mm; Bearing designation:6215 ; Oil:6 000 min-1; Weight:1.18 kg; da:82 min; Static (Cor):49.311 kN; Da:122 max; Grease:5 000 min-1; Dynamic (Cr):66.179 kN; ra:1.5 max; |
| RBC BEARINGS CS 104 LW Cam Follower and Track Roller - Stud Type | Fillet Radius ra:1.50 mm; Accessories:Seal & Snap-Ring; d:30.000 mm; Basic Dynamic Radial Load Rating C:43600 N; Basic Static Radial Load Rating Co:23600 N; Sealed Speed Rating n3:5600 rpm; Grease Speed Rating Open/Shielded n1:8500 rpm; D:90.0000 mm; B:23.00 mm; Oil Speed Rating Open/Shielded n2:10000 rpm; |
| SMITH BCR-1-1/8-XBC Cam Follower and Track Roller - Stud Type | Basic Static Radial Load Rating Co:196000 N; Fillet Radius ra:2.50 mm; Grease Speed Rating n1:2000 rpm; Accessories:Shield & Seal; B:73.00 mm; d:90.000 mm; Basic Dynamic Radial Load Rating C:212000 N; Oil Speed Rating n2:3000 rpm; Sealed Speed Rating n3:2000 rpm; D:190.0000 mm; |
| IKO CR26VUUR Cam Follower and Track Roller - Stud Type | D1 ≈:761 mm; ra max.:5 mm; G:Tr 600x6; Reference speed:530 r/min; Basic static load rating C0:11000 kN; Mass bearing + sleeve:415 kg; D:820 mm; r1,2 min.:6 mm; s1 max.:45.7 mm; B2 ≈:252 mm; |
| IKO CR26UU Cam Follower and Track Roller - Stud Type | Mass lock nut:3.55 kg; Recommended grub screw tightening torque:35 N·m; Axial static load carrying capacity:610 kN; b:18 mm; d3:240 mm; h:8 mm; G:M 190x3; Grub (set) screw size:M10; B:34 mm; d1:207 mm; |
| RBC BEARINGS CS 128 LWX Cam Follower and Track Roller - Stud Type | Grease Speed Rating n1:5000 rpm; Oil Speed Rating n2:6700 rpm; D:90.0000 mm; Sealed Speed Rating n3:5000 rpm; Accessories:One Shield & Snap-Ri; Basic Dynamic Radial Load Rating C:67100 N; Basic Static Radial Load Rating Co:65500 N; Fillet Radius ra:1.50 mm; B:39.70 mm; d:40.000 mm; |
| RBC BEARINGS CS 72 L Cam Follower and Track Roller - Stud Type | Basic Interchange NDH:-; Basic Interchange NSK:X555; Basic Radial Load Rating-Static SCO:40500 lbf; Basic Interchange SPLIT:-; Accessories:Mast Guide Type- 306; Basic Interchange:361885; Basic Interchange MCGILL:-; Basic Radial Load Rating-Dynamic DC:10970 lbf; Basic Interchange BCA:MG306DD; |
| IKO CR26V Cam Follower and Track Roller - Stud Type | J1:82.55 mm; Pa:26.7 kN; P90°:113 kN; A1:133.35 mm; P150°:68.1 kN; H1:152.4 mm; H:287.337 mm; da:100.013 mm; R1:79.375 mm; Appropriate attachment bolt size G:0.875 in; |
| RBC BEARINGS CS 88 LWX Cam Follower and Track Roller - Stud Type | Basic Static Radial Load Rating Co:8000 N; Fillet Radius ra:0.30 mm; D:78.0000 mm; B:10.00 mm; Basic Dynamic Radial Load Rating C:8710 N; Sealed Speed Rating n3:4800 rpm; d:60.000 mm; Accessories:Two Shields; Grease Speed Rating Open/Shielded n1:7500 rpm; Oil Speed Rating Open/Shielded n2:9000 rpm; |
| IKO CR8BUUR Cam Follower and Track Roller - Stud Type | P180°:37.8 kN; P120°:34.7 kN; da:70 mm; R2:22.225 mm; Taconite seal (dc shaft position):TER 43; J max.:279.4 mm; dc:66.675 mm; J min.:250.825 mm; Stabilizing ring:SR-17-14; H:187.325 mm; |
| RBC BEARINGS CS 192 LW Cam Follower and Track Roller - Stud Type | Permissible sliding velocity v max.:0.5 m/s; D1:95 mm; Tolerance housing:H7; Specific dynamic load factor K:25 N/mm²; Tolerance shaft:e7; Specific static load factor K0:45 N/mm²; B1:8 mm; d:70 mm; Coefficient of friction µ max.:0.15; Mass bushing:0.66 kg; |
| RBC BEARINGS CS 80 L Cam Follower and Track Roller - Stud Type | B1:93 mm; Hydraulic nut:HMV 32 E; G:M 160x3; d1:140 mm; Mass adapter sleeve assembly:5.1 kg; Lock nut:KMFE 32; d3:210 mm; B:32 mm; d:160 mm; |
RBC BEARINGS CS 88 L Cam Follower and Track Roller - Stud Type Video