IKO CR8R Cam Follower and Track Roller - Stud Type

No.	Brand	h	a	H	J	L	G	K	s
H 128	RBC BEARINGS	-	-	-	-	-	-	-	-
H 112	RBC BEARINGS	-	-	-	-	-	-	-	-
CRH22VBUU	IKO	-	-	-	-	-	-	-	-
DCR-1-1/4	SMITH	-	-	-	-	387.35 mm	-	-	-
CR8R	IKO	-	-	-	-	-	-	-	35 mm
CR26BR	IKO	-	-	-	-	-	M 200x3	-	-
CR26VBUU	IKO	-	-	-	-	-	-	-	2.4 mm
H 104 L	RBC BEARINGS	-	-	-	-	-	-	-	-
DCR-2	SMITH	-	-	-	-	-	-	-	-
BCR-7/8-XBC	SMITH	-	-	-	-	-	-	-	-
CR28	IKO	-	-	-	-	-	-	-	-
CR24VB	IKO	-	-	-	-	-	-	-	-
CS 88 LWX	RBC BEARINGS	-	-	-	-	-	-	-	-
CRH20VBUU	IKO	-	-	-	-	-	-	-	-
CS 88 L	RBC BEARINGS	-	-	-	-	-	M 125x2	-	-
BCR-1-5/8-XC	SMITH	-	-	-	-	-	-	-	-
CR26UUR	IKO	-	-	-	-	-	-	-	-
CS 72 LWX	RBC BEARINGS	-	-	-	-	-	-	-	-
CRH20VBUUR	IKO	-	-	-	-	-	-	-	-
CS 16 LWX	RBC BEARINGS	-	-	-	-	-	-	-	-
H 128 L	RBC BEARINGS	-	-	-	-	-	-	-	-
H 128 LW	RBC BEARINGS	-	-	-	-	-	-	-	-
CR26VBUUR	IKO	-	-	-	-	-	-	-	-
CR24VR	IKO	-	-	-	-	-	-	-	-
DCR-2-3/4	SMITH	-	-	-	-	57 mm	-	-	-
CS 112 LWX	RBC BEARINGS	-	-	-	-	-	-	-	-
CS 16 LW	RBC BEARINGS	-	-	-	-	-	-	-	-
BCR-2-3/4-BC	SMITH	55.563 mm	-	-	-	-	-	-	-
CS 128 L	RBC BEARINGS	-	-	-	-	-	-	-	-

SMITH BCR-1-XBC Cam Follower and Track Roller - Stud Type	Mass inner ring:0.038 kg; r, r1,2 min.:0.3 mm; d:35 mm; F:40 mm; B:17 mm;
RBC BEARINGS H 112 Cam Follower and Track Roller - Stud Type	Basic Static Radial Load Rating Co:81500 N; Sealed Speed Rating n3:2400 rpm; D:170.0000 mm; Basic Dynamic Radial Load Rating C:108000 N; Oil Speed Rating Open/Shielded n2:4300 rpm; B:32.00 mm; Oil Speed Rating n2:4300 rpm; Accessories:Two Seals; Fillet Radius ra:2.00 mm; d:95.000 mm;
RBC BEARINGS CS 88 LW Cam Follower and Track Roller - Stud Type	Basic dynamic load rating C:2160 kN; Limiting speed:1500 r/min; d1:280 mm; Operating clearance factor k2:0.095; G1:26 mm; Ca min.:1.7 mm; d2 ≈:351 mm; Basic static load rating C0:3750 kN; da min.:307 mm; Fatigue load limit Pu:290 kN;
SMITH BCR-1-3/8-XC Cam Follower and Track Roller - Stud Type	H:398.462 mm; h:61.913 mm; Initial grease fill:1672.65 g; A2:276.225 mm; ba:78.581 mm; RG:1 NPT; Housing:SAFS 538; End plug (suffix Y):EPR 21; Labyrinth ring:2 x LOR 156; P150°:136 kN;
RBC BEARINGS H 160 LW Cam Follower and Track Roller - Stud Type	d1:280 mm; B1:184 mm; Nut for removal:HM 3164; G1:24 mm; G2:G 1/8; G:Tr 320x5; A:6.5 mm; Hydraulic nut:HMV 64 E; B2:202 mm; d:300 mm;
IKO CRH18VBUUR Cam Follower and Track Roller - Stud Type	Da max.:469 mm; Fw:415 mm; ra max.:2 mm; Limiting speed:1000 r/min; Fatigue load limit Pu:270 kN; Basic dynamic load rating C:968 kN; C:100 mm; Basic static load rating C0:3000 kN; r1,2 min.:2.1 mm; Reference speed:900 r/min;
SMITH DCR-2-3/4 Cam Follower and Track Roller - Stud Type	Fatigue load limit Pu:0.2 kN; B:27.4 mm; Thread grub screw G2:#10-32 UNF; Basic dynamic load rating C:9.56 kN; J7:11 mm; RG:1/4-28 UNF; DN:6.5 mm; L:57 mm; T:32.9 mm; R1:19 mm;
IKO CR26VR Cam Follower and Track Roller - Stud Type	F:135 mm; ra max.:2 mm; Basic static load rating C0:183 kN; Mass bearing:2.47 kg; r3,4 min.:1.1 mm; Fatigue load limit Pu:20.8 kN; D1 ≈:158.85 mm; rb max.:1 mm; s max.:3.8 mm; Axial load factor Y:0.6;
SMITH BCR-1-1/4-XC Cam Follower and Track Roller - Stud Type	G:M 52x3; dk:80 mm; α:6 °; B:44 mm; l7 min.:70 mm; w:70 mm; Mass rod end:6.3 kg; C1 max.:39 mm; h1:175 mm; d4 ≈:82 mm;
SMITH BCR-1-7/8-BC Cam Follower and Track Roller - Stud Type	B1:3 mm; B:20 mm; Tolerance housing:H7; D1:26 mm; Specific static load factor K0:20 N/mm²; Permissible sliding velocity v min.:0.25 m/s; Mass bushing:0.026 kg; Tolerance shaft:h8; Coefficient of friction µ max.:0.1; Coefficient of friction µ min.:0.05;
RBC BEARINGS H 18 LW Cam Follower and Track Roller - Stud Type	Mass angle ring:14 kg; d:460 mm; B1:25 mm; d1 ≈:537.6 mm; r3,4 min.:6 mm; B2:48 mm;
IKO CR26VUUR Cam Follower and Track Roller - Stud Type	D1 ≈:761 mm; ra max.:5 mm; G:Tr 600x6; Reference speed:530 r/min; Basic static load rating C0:11000 kN; Mass bearing + sleeve:415 kg; D:820 mm; r1,2 min.:6 mm; s1 max.:45.7 mm; B2 ≈:252 mm;
IKO CR26R Cam Follower and Track Roller - Stud Type	B:41.28 mm; rs (min):1.5 mm; Dynamic (Ca):196 kN; Static (Coa):299 kN; s:4.5 mm; F:89 mm; d2:75 mm; b1:mm; E:mm; d2 (max):mm;
IKO CR8BUUR Cam Follower and Track Roller - Stud Type	P180°:37.8 kN; P120°:34.7 kN; da:70 mm; R2:22.225 mm; Taconite seal (dc shaft position):TER 43; J max.:279.4 mm; dc:66.675 mm; J min.:250.825 mm; Stabilizing ring:SR-17-14; H:187.325 mm;

CR8R - IKO Inch Series Cam Followers CR - Quality ...

CR8R | Cam Followers - With Cage, With Screwdriver Slot ...

IKO Cam Followers are bearings with a stud incorporating needle rollers in a thick walled outer ring.These bearings are designed for outer ring rotation,and ...Roller Type: Spherical Outer RingMaterial: Carbon SteelShape: Shield Type

IKO International Inc. | CR8R | INCH CAM FOLLOWERS

Shop IKO International Inc. CR8R at Applied.com.

IKO International, Inc. - CR8R - Allied Electronics

IKO International, Inc. CR8R. Mfr. Part #: CR8R Allied Stock #: 71916953. Description. Cam Follower,Crowned,1/2" Roller DIA,11/32" Width,4.826mm Stud DIA ...

Iko Cr8r | Apex Industrial Automation

CR8R. HOME > Products > BEARINGS > CR8R. Part / Catalog # CR8R; Manufacturer: IKO; UPC: 04549557013638; Weight: 0.02 LB; Description: Inch; Returnable: Yes ...