IKO CR24VBUU Cam Follower and Track Roller - Stud Type

No.	Brand	h	a	H	J	L	G	K	s
CS 64 LWX	RBC BEARINGS	-	-	-	-	-	-	-	-
CS 96 L	RBC BEARINGS	-	-	-	-	-	-	-	-
BCR-1-3/8-XC	SMITH	61.913 mm	-	398.462 mm	-	-	-	-	-
BCR-1-7/8-XC	SMITH	-	-	-	-	-	-	-	-
BCR-1-1/2-XC	SMITH	-	-	-	-	-	-	-	-
CR26BR	IKO	-	-	-	-	-	M 200x3	-	-
H 20 LW	RBC BEARINGS	-	80 mm	-	-	-	-	-	-
H 128 LW	RBC BEARINGS	-	-	-	-	-	-	-	-
BCR-5/8-XC	SMITH	-	-	-	-	-	-	-	-
CS 88 LWX	RBC BEARINGS	-	-	-	-	-	-	-	-
DCR-1-7/8	SMITH	-	-	-	-	-	-	-	-
BCR-2-XC	SMITH	-	20.871 mm	-	-	-	-	-	-
CR26V	IKO	-	-	287.337 mm	-	-	-	-	-
CR8BR	IKO	-	-	-	139.7 mm	171.45 mm	-	-	-
H 18 LW	RBC BEARINGS	-	-	-	-	-	-	-	-
CS 88 LW	RBC BEARINGS	-	-	-	-	-	-	-	-
CRH16VB	IKO	-	-	169.863 mm	-	-	-	-	-
CR26VBR	IKO	-	-	-	-	-	-	-	-
CS 20 LW	RBC BEARINGS	-	-	-	-	-	-	8.5 mm	-
BCR-1/2-XC	SMITH	-	-	-	-	-	-	15 mm	-

SMITH DCR-2-3/4 Cam Follower and Track Roller - Stud Type	Fatigue load limit Pu:0.2 kN; B:27.4 mm; Thread grub screw G2:#10-32 UNF; Basic dynamic load rating C:9.56 kN; J7:11 mm; RG:1/4-28 UNF; DN:6.5 mm; L:57 mm; T:32.9 mm; R1:19 mm;
IKO CR26UU Cam Follower and Track Roller - Stud Type	Mass lock nut:3.55 kg; Recommended grub screw tightening torque:35 N·m; Axial static load carrying capacity:610 kN; b:18 mm; d3:240 mm; h:8 mm; G:M 190x3; Grub (set) screw size:M10; B:34 mm; d1:207 mm;
IKO CR24VBR Cam Follower and Track Roller - Stud Type	A1:120.65 mm; P150°:66.7 kN; Pa:14 kN; J1:69.85 mm; P90°:111 kN; Cap bolt recommended tightening torque:1220 N·m; A2:187.325 mm; Cap bolt:2 x 1-8 UNC; P60°:185 kN; Bearing limiting speed:4000 r/min;
RBC BEARINGS CS 60 LWX Cam Follower and Track Roller - Stud Type	Basic static load rating C0:530 kN; w:80 mm; G:M 72x4; Mass rod end:10.5 kg; l3 min.:80 mm; l5 ≈:40 mm; Basic dynamic load rating C:315 kN; d2 max.:162 mm; d4 ≈:92 mm; Specific dynamic load factor K:100 N/mm²;
SMITH BCR-1-3/8-XC Cam Follower and Track Roller - Stud Type	H:398.462 mm; h:61.913 mm; Initial grease fill:1672.65 g; A2:276.225 mm; ba:78.581 mm; RG:1 NPT; Housing:SAFS 538; End plug (suffix Y):EPR 21; Labyrinth ring:2 x LOR 156; P150°:136 kN;
SMITH BCR-1-XC Cam Follower and Track Roller - Stud Type	r1,2 min.:4 mm; Mass bearing:75 kg; Reference speed:260 r/min; Basic dynamic load rating C:2080 kN; D:520 mm; B:33.5 mm; Limiting speed:500 r/min; Basic static load rating C0:10000 kN; H:112 mm; ra max.:3 mm;
RBC BEARINGS H 128 Cam Follower and Track Roller - Stud Type	Grease Speed Rating Open/Shielded n1:1900 rpm; Oil Speed Rating Open/Shielded n2:2300 rpm; Accessories:One Shield; B:40.00 mm; D:250.0000 mm; Basic Static Radial Load Rating Co:255000 N; Fillet Radius ra:2.00 mm; Basic Dynamic Radial Load Rating C:190000 N; d:160.000 mm;
RBC BEARINGS CS 64 L Cam Follower and Track Roller - Stud Type	F:10 mm; B:10 mm; d:6 mm; r, r1,2 min.:0.3 mm; Mass inner ring:0.0037 kg;
SMITH BCR-1/2-XC Cam Follower and Track Roller - Stud Type	B:335 mm; da min.:778 mm; Limiting speed:40 r/min; Da max.:1062 mm; d2 ≈:856 mm; Reference speed:20 r/min; K:15 mm; D:1090 mm; b:72.8 mm; Calculation factor Y2:3.4;
RBC BEARINGS CS 80 LWX Cam Follower and Track Roller - Stud Type	D:80 mm; d3:58 mm; B1:46 mm; d2 ≈:47.2 mm; Basic dynamic load rating C:98.5 kN; r1,2 min.:1.1 mm; Calculation factor Y1:2.4; Calculation factor e:0.28; Da max.:73 mm; Calculation factor Y2:3.6;
RBC BEARINGS H 104 L Cam Follower and Track Roller - Stud Type	B:41.30 mm; Sealed Speed Rating n3:3200 rpm; D:130.0000 mm; d:75.000 mm; Basic Dynamic Radial Load Rating C:108000 N; Fillet Radius ra:1.50 mm; Oil Speed Rating n2:4300 rpm; Basic Static Radial Load Rating Co:137000 N; Grease Speed Rating n1:3200 rpm; Accessories:One Seal;
SMITH BCR-1-3/4-XC Cam Follower and Track Roller - Stud Type	r3,4 min.:0.6 mm; d2:82.3 mm; rb max.:0.6 mm; Static axial stiffness, preload class D:496 N/µm; Calculation factor e:0.68; D:110 mm; a:31.1 mm; Calculation factor (single, tandem) Y2:0.87; Static axial stiffness, preload class A:212 N/µm; d1:82.3 mm;
SMITH BCR-5/8-XBC Cam Follower and Track Roller - Stud Type	Mass angle ring:1.25 kg; B1:12 mm; d1 ≈:193.3 mm; d:150 mm; r3,4 min.:3 mm; B2:19.5 mm;
RBC BEARINGS CS 80 LW Cam Follower and Track Roller - Stud Type	Static (Cor):22.3 mm; Oil:506.370 kN; rs (min):5 mm; Dynamic (Cr):12 mm; Grease:6520 kN; D:580 mm; with tapered bore:530 min-1; d:320 mm; B:208 mm; with cylindrical bore:450 min-1;

IKO International, Inc. - CR24VBUU - Allied Electronics

IKO International, Inc. CR24VBUU. Mfr. Part #: CR24VBUU Allied Stock #: 71916847. Description. Cam Follower,Flat,1 1/2" Roller DIA,7/8" Roller W,5/8" Stud ...

CR24VBUU - IKO Inch Series Cam Followers CR - Quality ...

CR24VBUU | Cam Followers - Full Complement Type ...

Cam Followers - Full Complement Type, With Hexagon Hole, Sealed Type CRVBUU Series (Inch) (IKO) (CR24VBUU) ; Total: $39.38 ; Ship Date: Wed. Apr 13, 2022 ; Roller ...Roller Type: Cylindrical Outer RingShape: Seal ShapeMaterial: Carbon SteelShip Date: Wed. Apr 13, 2022$39.38 · ‎In stock

IKO cr24vbuu bearing - IKO inch series cam followers cr ...

IKO CR24VBUU - IKO Inch Series Cam Followers CR - Full Compliment Type g IKO sbb96 bearing IKO sbb80-2rs bearing IKO sbb80 bearing IKO sbb76-2rs bearing IKO ...