IKO CR26B Cam Follower and Track Roller - Stud Type

No.	Brand	h	a	H	J	L	G	K	s
CS 96 L	RBC BEARINGS	-	-	-	-	-	-	-	-
BCR-1-7/8-BC	SMITH	-	-	-	-	-	-	-	-
H 128 L	RBC BEARINGS	-	-	-	-	-	-	-	-
CR24VUU	IKO	46.831 mm	-	-	-	419.1 mm	-	-	-
CRH18V	IKO	-	-	-	-	-	-	-	-
CR8UU	IKO	-	-	-	-	-	-	-	-
CS 88 LW	RBC BEARINGS	-	-	-	-	-	-	-	-
CS 80 L	RBC BEARINGS	-	-	-	-	-	M 160x3	-	-
H 112 L	RBC BEARINGS	-	-	-	-	-	-	-	-
BCR-7/8-XC	SMITH	-	-	-	-	76 mm	-	-	-
BCR-1-7/8-XC	SMITH	-	-	-	-	-	-	-	-
DCR-2-1/4	SMITH	163 mm	-	-	-	-	M 42x3	-	-
H 16 LW	RBC BEARINGS	-	-	-	-	-	-	-	-
BCR-5/8-XC	SMITH	-	-	-	-	-	-	-	-
CRH18VUU	IKO	-	-	-	-	-	-	-	-
DCR-2-1/2	SMITH	-	-	-	-	-	-	-	-
DCR-1-3/8	SMITH	-	-	-	-	-	-	-	-
CR24VBUUR	IKO	-	-	-	-	-	-	-	-
CR26UUR	IKO	-	-	-	-	-	-	-	-
BCR-1-1/8-XBC	SMITH	-	-	-	-	-	-	-	-
CS 20 LW	RBC BEARINGS	-	-	-	-	-	-	8.5 mm	-
CR26VBR	IKO	-	-	-	-	-	-	-	-
CS 80 LW	RBC BEARINGS	-	-	-	-	-	-	-	-
CS 88 LWX	RBC BEARINGS	-	-	-	-	-	-	-	-
CRH20VB	IKO	-	-	-	-	-	-	-	-
BCR-1-1/8-XC	SMITH	-	-	-	-	-	-	-	-
CR24VB	IKO	-	-	-	-	-	-	-	-

IKO CRH20VBUUR Cam Follower and Track Roller - Stud Type	rs Dynamic (Cr):1.5 mm; B1:mm; D:90 mm; d:40 mm; Oil:6 700 min-1; with cylindrical bore:7 900 min-1; Grease:0.600 kN; Pu:13.300 kN; Static (Cor):46.140 kN; with tapered bore:2308 ;
RBC BEARINGS H 104 LW Cam Follower and Track Roller - Stud Type	B:1.5000 in; Fillet Radius ra:0.12 in; Basic Dynamic Radial Load Rating C:163000 N; d:8.500 in; Basic Static Radial Load Rating Co:232000 N; Fillet Radius rb:0.060 in; Grease Speed Rating n1:2000 rpm; D:11.5000 in; Oil Speed Rating n2:2800 rpm;
RBC BEARINGS H 192 LW Cam Follower and Track Roller - Stud Type	B1:9 mm; B2:16 mm; d:60 mm; d1 ≈:84.35 mm; Mass angle ring:0.24 kg; r3,4 min.:2.1 mm;
RBC BEARINGS CS 80 LW Cam Follower and Track Roller - Stud Type	Static (Cor):22.3 mm; Oil:506.370 kN; rs (min):5 mm; Dynamic (Cr):12 mm; Grease:6520 kN; D:580 mm; with tapered bore:530 min-1; d:320 mm; B:208 mm; with cylindrical bore:450 min-1;
IKO CR24VR Cam Follower and Track Roller - Stud Type	Grease Speed Rating n1:3600 rpm; Basic Static Radial Load Rating Co:28500 N; B:40.00 mm; Fillet Radius ra:2.00 mm; Oil Speed Rating n2:4300 rpm; D:160.0000 mm; d:90.000 mm; Basic Dynamic Radial Load Rating C:70200 N;
SMITH BCR-3/4-XBC Cam Follower and Track Roller - Stud Type	Fillet Radius rb:2.00 mm; Basic Dynamic Radial Load Rating C:832000 N; d:280.000 mm; Basic Static Radial Load Rating Co:1460000 N; Oil Speed Rating n2:1200 rpm; B:108.00 mm; Grease Speed Rating n1:980 rpm; Fillet Radius ra:5.00 mm; D:580.0000 mm;
IKO CR8BUU Cam Follower and Track Roller - Stud Type	A:40 mm; H2:16.5 mm; Fatigue load limit Pu:0.475 kN; Basic static load rating C0:11.2 kN; Thread grub screw G2:1/4-28 UNF; Hexagonal key size for grub screw N:3.175 mm; J min.:108 mm; N1:15.5 mm; End cover:ECW 206; Mass bearing unit:1.3 kg;
IKO CRH18VUU Cam Follower and Track Roller - Stud Type	Appropriate attachment bolt size G:0.625 in; R1:63.5 mm; da:80 mm; Mass pillow block:28.6 kg; PG:1/8 NPT; Cap bolt, SAE grade:8; db:92.075 mm; End plug (suffix Y):EPR 10; J1:53.975 mm; Stabilizing ring:2 x SR-1616;
RBC BEARINGS CS 16 LW Cam Follower and Track Roller - Stud Type	Grease Speed Rating Open/Shielded n1:3200 rpm; Basic Dynamic Radial Load Rating C:174000 N; D:210.0000 mm; Oil Speed Rating Open/Shielded n2:3800 rpm; Sealed Speed Rating n3:2200 rpm; d:85.000 mm; Basic Static Radial Load Rating Co:137000 N; Fillet Radius ra:3.00 mm; B:52.00 mm; Accessories:Without Accessories;
SMITH BCR-3/4-XC Cam Follower and Track Roller - Stud Type	B:49.00 mm; Accessories:Two Shields & Snap-R; Fillet Radius ra:2.50 mm; Grease Speed Rating Open/Shielded n1:2400 rpm; Basic Static Radial Load Rating Co:232000 N; d:105.000 mm; Basic Dynamic Radial Load Rating C:205000 N; Oil Speed Rating Open/Shielded n2:2900 rpm; D:225.0000 mm;
IKO CR24VBUUR Cam Follower and Track Roller - Stud Type	Calculation factor e:0.4; Dimension series:6500; Reference speed:3200 r/min; Da max.:149 mm; C:42.862 mm; Calculation factor Y0:0.8; Db min.:153 mm; T:53.975 mm; Basic dynamic load rating C:404 kN; da max.:102 mm;
SMITH BCR-2-BC Cam Follower and Track Roller - Stud Type	Basic Static Radial Load Rating Co:36500 N; B:27.00 mm; Oil Speed Rating n2:8000 rpm; Grease Speed Rating n1:6000 rpm; Basic Dynamic Radial Load Rating C:39100 N; Accessories:One Shield & Snap-Ri; Fillet Radius ra:1.00 mm; Sealed Speed Rating n3:6000 rpm; d:35.000 mm; D:72.0000 mm;
SMITH BCR-7/8-XBC Cam Follower and Track Roller - Stud Type	Basic Static Radial Load Rating Co:2520 lbf; Diameter N:0.5000 in; Insert Bearing IB:ZMaRC; Shaft Diameter D:1 1/8 in; Height H:5.5625 in; Basic Dynamic Radial Load Rating:4380 lbf; Dimension L:3.1250 in; Dimension A1:1.2813 in; Dimension DA:3.0000 in; Height T:1.6563 in;
RBC BEARINGS CS 72 L Cam Follower and Track Roller - Stud Type	Basic Interchange NDH:-; Basic Interchange NSK:X555; Basic Radial Load Rating-Static SCO:40500 lbf; Basic Interchange SPLIT:-; Accessories:Mast Guide Type- 306; Basic Interchange:361885; Basic Interchange MCGILL:-; Basic Radial Load Rating-Dynamic DC:10970 lbf; Basic Interchange BCA:MG306DD;

CR26B - IKO | Cam Follower and Track Roller - Stud Type - BDI

1-5/8" Roller Diameter; 7/8" Roller Width; Flat Roller Surface Profile; 5/8" Stud Diameter; 5/8-18 Thread Size; Standard Stud Stud Profile; Metal Shielded ...

IKO International, Inc. - CR26B - Cam Follower,Flat,1 5/8" Roller DIA ...

IKO International, Inc. CR26B ; Roller Shape, Flat ; Stud Diameter, 5/8 in. ; Stud Length, 1 1/2 in. ; UPC Code, 4549557015359.

CR26B | IKO - Inch Series Cam Followers With Cage/With Hexagon ...

CR26B IKO - Inch Series Cam Followers With Cage/With Hexagon Hole - Shield type from IKO. MISUMI offers free CAD downloads, short lead times, ...

IKO CR26B - CAM INCH | DXP Enterprises

Brand: IKO; Package Size: 1; Standard Inch Series Cam FollowerCaged, High Carbon Steel, Cylindrical Outer Ring, Shielded, Hex Head. Specifications ...

IKO International Inc. | CR26B | INCH CAM FOLLOWERS | Applied

Shop IKO International Inc. CR26B at Applied.com.