IKO CR26R Cam Follower and Track Roller - Stud Type

No.	Brand	h	a	H	J	L	G	K	s
CRH20VUU	IKO	-	-	-	-	-	-	-	-
CS 112 L	RBC BEARINGS	-	-	-	-	-	M 180x3	-	-
CR26VR	IKO	-	-	-	-	-	-	-	-
CR26B	IKO	-	-	-	-	-	-	-	-
H 128	RBC BEARINGS	-	-	-	-	-	-	-	-
BCR-1-1/8-XBC	SMITH	-	-	-	-	-	-	-	-
H 16 LW	RBC BEARINGS	-	-	-	-	-	-	-	-
H 20 LW	RBC BEARINGS	-	80 mm	-	-	-	-	-	-
H 112 L	RBC BEARINGS	-	-	-	-	-	-	-	-
H 112 LW	RBC BEARINGS	-	-	-	-	-	-	-	-
CR24VR	IKO	-	-	-	-	-	-	-	-
CR8BUUR	IKO	-	-	187.325 mm	-	-	-	-	-
CR8R	IKO	-	-	-	-	-	-	-	35 mm
CRBC 2	RBC BEARINGS	-	-	-	-	-	-	-	-
BCR-2-3/4-BC	SMITH	55.563 mm	-	-	-	-	-	-	-
CRH22V	IKO	-	-	-	-	-	-	-	-
BCR-3-BC	SMITH	-	-	-	-	-	-	-	-
CS 64 LW	RBC BEARINGS	-	-	-	-	-	-	-	-
CR8BR	IKO	-	-	-	139.7 mm	171.45 mm	-	-	-
BCR-2-1/4-XC	SMITH	-	51.665 mm	-	-	-	-	-	-
CS 72 LWX	RBC BEARINGS	-	-	-	-	-	-	-	-
CRH20V	IKO	-	-	-	-	-	-	-	-
CRH22VBUU	IKO	-	-	-	-	-	-	-	-
H 112	RBC BEARINGS	-	-	-	-	-	-	-	-
CR26UU	IKO	8 mm	-	-	-	-	M 190x3	-	-
H 104 LW	RBC BEARINGS	-	-	-	-	-	-	-	-

RBC BEARINGS CS 80 L Cam Follower and Track Roller - Stud Type	B1:93 mm; Hydraulic nut:HMV 32 E; G:M 160x3; d1:140 mm; Mass adapter sleeve assembly:5.1 kg; Lock nut:KMFE 32; d3:210 mm; B:32 mm; d:160 mm;
SMITH DCR-2-1/2 Cam Follower and Track Roller - Stud Type	Weight:0.145 kg; rs:1.1 mm; Da:45 max; ra:1 max; Oil:17 000 min-1; B:15 mm; Static (Cor):7.811 kN; Bearing designation:6304 ; Grease:14 000 min-1; Pu:0.355 kN;
RBC BEARINGS CS 112 L Cam Follower and Track Roller - Stud Type	Hydraulic nut:HMV 36 E; d:180 mm; B:34 mm; G:M 180x3; Lock nut:KMFE 36; Mass adapter sleeve assembly:7.2 kg; d1:163.512 mm; d3:230 mm; B1:122 mm;
IKO CRH18VUU Cam Follower and Track Roller - Stud Type	Appropriate attachment bolt size G:0.625 in; R1:63.5 mm; da:80 mm; Mass pillow block:28.6 kg; PG:1/8 NPT; Cap bolt, SAE grade:8; db:92.075 mm; End plug (suffix Y):EPR 10; J1:53.975 mm; Stabilizing ring:2 x SR-1616;
RBC BEARINGS CS 72 L Cam Follower and Track Roller - Stud Type	Basic Interchange NDH:-; Basic Interchange NSK:X555; Basic Radial Load Rating-Static SCO:40500 lbf; Basic Interchange SPLIT:-; Accessories:Mast Guide Type- 306; Basic Interchange:361885; Basic Interchange MCGILL:-; Basic Radial Load Rating-Dynamic DC:10970 lbf; Basic Interchange BCA:MG306DD;
RBC BEARINGS CS 160 LW Cam Follower and Track Roller - Stud Type	ba:70.644 mm; da:139.7 mm; Cap bolt recommended tightening torque:813.5 N·m; P90°:207 kN; Bearing:22232 CCK/W33; h:51.594 mm; RG:3/4 NPT; P60°:345 kN; P180°:145 kN; Housing:SSAFS 532;
IKO CRH16VUU Cam Follower and Track Roller - Stud Type	d:20.000 mm; Oil Speed Rating Open/Shielded n2:11000 rpm; Basic Dynamic Radial Load Rating C:29200 N; D:72.0000 mm; Basic Static Radial Load Rating Co:18600 N; Accessories:One Shield; B:19.00 mm; Grease Speed Rating Open/Shielded n1:9000 rpm; Fillet Radius ra:1.00 mm;
SMITH DCR-2-3/4 Cam Follower and Track Roller - Stud Type	Fatigue load limit Pu:0.2 kN; B:27.4 mm; Thread grub screw G2:#10-32 UNF; Basic dynamic load rating C:9.56 kN; J7:11 mm; RG:1/4-28 UNF; DN:6.5 mm; L:57 mm; T:32.9 mm; R1:19 mm;
IKO CR26V Cam Follower and Track Roller - Stud Type	J1:82.55 mm; Pa:26.7 kN; P90°:113 kN; A1:133.35 mm; P150°:68.1 kN; H1:152.4 mm; H:287.337 mm; da:100.013 mm; R1:79.375 mm; Appropriate attachment bolt size G:0.875 in;
IKO CR26VR Cam Follower and Track Roller - Stud Type	F:135 mm; ra max.:2 mm; Basic static load rating C0:183 kN; Mass bearing:2.47 kg; r3,4 min.:1.1 mm; Fatigue load limit Pu:20.8 kN; D1 ≈:158.85 mm; rb max.:1 mm; s max.:3.8 mm; Axial load factor Y:0.6;
SMITH BCR-1-7/8-BC Cam Follower and Track Roller - Stud Type	B1:3 mm; B:20 mm; Tolerance housing:H7; D1:26 mm; Specific static load factor K0:20 N/mm²; Permissible sliding velocity v min.:0.25 m/s; Mass bushing:0.026 kg; Tolerance shaft:h8; Coefficient of friction µ max.:0.1; Coefficient of friction µ min.:0.05;
IKO CR26BUUR Cam Follower and Track Roller - Stud Type	Axial load factor Y:0.6; d:130 mm; Limiting speed:3800 r/min; Mass bearing:3.75 kg; Limiting value e:0.2; Reference speed:3800 r/min; r3,4 min.:1.1 mm; F:148 mm; d1 ≈:154 mm; da min.:137 mm;
SMITH BCR-3-XC Cam Follower and Track Roller - Stud Type	Basic dynamic load rating C:245 kN; Limiting speed:5600 r/min; db min.:66.5 mm; Db min.:111 mm; r1,2 min.:2.5 mm; Ca min.:5 mm; rb max.:2 mm; D:120 mm; Calculation factor e:0.35; d1 ≈:84.6 mm;
SMITH BCR-1-XC Cam Follower and Track Roller - Stud Type	r1,2 min.:4 mm; Mass bearing:75 kg; Reference speed:260 r/min; Basic dynamic load rating C:2080 kN; D:520 mm; B:33.5 mm; Limiting speed:500 r/min; Basic static load rating C0:10000 kN; H:112 mm; ra max.:3 mm;

CR26R - IKO Inch Series Cam Followers CR - Quality ...

IKO cr26r bearing - IKO inch series cam followers cr -CR26R - IKO ...

IKO CR26R - IKO Inch Series Cam Followers CR - Caged Type With Driver Slot g IKO sbb96 bearing IKO sbb80-2rs bearing IKO sbb80 bearing IKO sbb76-2rs bearing ...

CR26R | Cam Followers - With Cage, With Screwdriver ...

Cam Followers - With Cage, With Screwdriver Slot, Shield Type, CR Series (Inch) (IKO) (CR26R) ; Total: $44.92 ; Ship Date: Mon. May 23, 2022 ; Roller Type ...Roller Type: Spherical Outer RingMaterial: Carbon SteelShape: Shield Type$43.12 · ‎In stock

CR26R, IKO, IKO Cam Follower Inch Series Slot Type Crwnd

Mfr Part No. CR26R. Acorn Code, CR26R-IKO. HS Code, 8482 40 00 00. COO, JP. £15.09 exc VAT ...Weight (Kg): 0.280Thread: 5Id (mm): 15.875Width (mm): 41.275

IKO Cam Follower-INCH Caged Crowned OD Screwdriver ...

IKO Cam Follower-INCH Caged Crowned OD Screwdriver Slot 1-5/8" OD 7/8"W 5/8 - 18 THR. Buy it and Save at GlobalIndustrial.com.

CR26R - IKO | Cam Follower and Track Roller - Stud Type ...

1-5/8" Roller Diameter; 7/8" Roller Width; Crowned Roller Surface Profile; 5/8" Stud Diameter; 5/8-18 Thread Size; Standard Stud Stud Profile; Metal Shielded ...

IKO International, Inc. - CR26R - Cam Follower,Crowned,1 5/8 ...

IKO International, Inc. CR26R. Mfr. Part #: CR26R Allied Stock #: 71916857. Description. Cam Follower,Crowned,1 5/8" Roller DIA,7/8" Width,5/8" Stud DIA,1 ...